SciELO - Scientific Electronic Library Online

 
vol.36 número3Soil resistance to penetration and forage and root production at different grazing intensitiesDuration-frequency relationships of heavy rainfall in Santa Catarina, Brazil índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Revista Brasileira de Ciência do Solo

versión impresa ISSN 0100-0683

Resumen

MULLER, Marcelo Marques Lopes et al. Structural quality of a no-tillage red latosol 50 months after gypsum aplication. Rev. Bras. Ciênc. Solo [online]. 2012, vol.36, n.3, pp. 1005-1014. ISSN 0100-0683.  http://dx.doi.org/10.1590/S0100-06832012000300030.

Gypsum application may enhance the soil quality for plants in terms of soil chemical and physical properties. The objective of this study was to evaluate the effects of gypsum application on the structural quality of a no-tillage Red Latosol. The experiment was initiated in September 2005 in Guarapuava-PR, with gypsum applications of 0; 4; 8; and 12 Mg ha-1 on the soil surface. In November 2009, two soil blocks were sampled from the 0-0.3 m layer for visual evaluation of the soil structure quality (Sq) and to determine the aggregate-tensile strength (ATS). Soil penetration resistance (PR) and gravimetric moisture (H%) of the 0-0.300 m layer were evaluated, and soil cores were collected (layers 0.000-0.075 and 0.075-0.150 m), to determine soil bulk density (BD), total soil porosity (TP), microporosity (Mi), and macroporosity (Ma). Data were subjected to analysis of regression at 5 %. No significant effects of gypsum application on ATS and H % of aggregates were observed, but for Sq, a quadratic effect (0.000-0.075 m) and linear increase (0.075-0.150 and 0.150-0.300 m) were stated, indicating soil quality decrease, although Sq remained mostly below 3.0, with good to intermediate soil quality. Soil PR increased with gypsum, but also remained below critical levels. No effect was observed for soil H % at the moment of PR determination on the field. The gypsum applications decreased BD in the 0.075-0.150 m layer, and increased PT and Ma, while in 0.000-0.075 m some Ma was converted to Mi, without affecting PT and BD. These last results indicate a gain in soil structural quality by gypsum applications, but the higher scores of soil structure and values of soil penetration resistance, though still below thresholds, should be monitored to prevent limitations to soil use in the future.

Palabras llave : phosphogypsum; soil physics; visual score; aggregation forces.

        · resumen en Portugués     · texto en Inglés     · pdf en Inglés