Figura 1
Atenuação de uma fibra óptica de SiO2 e bandas de emissão de alguns íons lantanídeos em diferentes matrizes. Adaptada da ref. 88 Prakash, S. S. B. G. V.; Reddy, A. A;. In Advances in Optical Amplifiers; Urquhart, P., ed.; InTech: Rijeka, 2011.
Figura 2
Espectros de emissão de Er3+ em guias de onda planar de sistemas nanocompositos de SiO2-Ta2O5 na região do infravermelho próximo (banda S, C e L usada em telecomunicações). Adaptada da ref. 1919 Ferrari, J. L.; Lima, K. O., Maia, L. J. Q.; Ribeiro, S. J. L.; Gonçalves, R. R.; J. Am. Ceram. Soc.
2011, 94, 1230.
Figura 3
Esquema do interferômetro IOTA usando uma plataforma de guia de onda planar. Adaptado da ref. 2525 Berger, J. P.; Haguenauer, P.; Kern, P.; Perraut, K.; Malbet, F; Schanen, I.; Severi, M.; Millan-Gabet, R.; Traub, W.; Astron. Astrophys. 2001, 376, L31.
Figura 4
a) Esquema dos principais mecanismos envolvidos nos concentradores solares. B,c,d e e) Fotografias de alguns concentradores solares luminescentes à base de filmes contendo complexos de íons lantanídeos, após irradiação no UV (365 nm). Adaptado da ref. 33 Correia, S. F. H.; de Zea Bermudez, V.; Ribeiro, S. J. L.; André, P. S.; Ferreira, R. A. S; Carlos, L. D.; J. Mater. Chem. A
2014, 2, 5580.
Figura 5
Espectro de irradiância solar padrão (AM1.5G)2828 ASTM. 2003. Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface, Standard G173-03e1 West Conshohocken, PA, USA: American Society for Testing and Materials. e as frações do total de energia disponíveis para downconversion (DC) e/ou para downshifting e de upconversion (UC)
Figura 6
Esquema do laser em guia de onda de silica-hafnia dopado com Nd3+ obtido por sol-gel. A rede externa à esquerda é usada para entrada e saída do bombeio. A cavidade é constituída por uma rede parcialmente refletora à esquerda e uma rede totalmente refletora na face direita. Adaptado da ref. 2929 Peled, A.; Chiasera, A.; Nathan, M.; Ferrari, M.; Ruschin, S.; Appl. Phys. Lett.
2008, 92, 221104-1.
Figura 7
Conversão ascendente de energia, com emissão de luz verde e vermelha, após excitação em 980 nm em um guia de onda planar nanoestruturado de SiO2-Ta2O5: Er3+/Yb3+. Adaptado da ref. 3030 Ferrari, J. L.; Lima, K. O.; Pecoraro, E.; Ferreira, R. A. S.; Carlos, L. D.; Gonçalves, R. R.; J. Mater. Chem.
2012, 22, 9901.
Figura 8
a) Representação dos efeitos de autofocalização e b) autodesfocalização
Figura 9
a) Técnica de varredura-Z refrativa. A linha azul ilustra o resultado para n2 > 0, enquanto a linha vermelha hachurada para n2 < 0. b) Técnica de varredura-Z absortiva (remoção da abertura) e sua curva característica para processo de absorção multifotônica
Figura 10
Resultados de medida de RNLPE em diferentes vidros ópticos (mesma espessura -1 mm) nas mesmas condições experimentais. A linha contínua é um ajuste teórico utilizando uma função Lorentziana relativo ao perfil de irradiânia do feixe em função de z
Figura 11
a) Microscopia óptica de uma guia de onda fabricada no vidro BSi:Cu (1 KHz de taxa de repetição) com energia de 55 nJ e velocidade de varredura de 10 µm s-1 e NA=0,65. A inserção mostra uma imagem da seção transversal do guia. b) Imagem do perfil de luz na saída do guia para 632,8 nm
Figura 12
Esquemas exemplificando dois mecanismos de guiamento da luz em fibras microestruturadas preenchidas com líquidos. (a) O líquido (laranja) é inserido apenas no núcleo de uma fibra de núcleo oco, elevando o índice desta região em relação à casca microestruturada. (b) Toda a microestrutura da casca de uma fibra de núcleo oco é preenchida, porém mantendo-se o índice efetivo desta região menor do que o do núcleo
Figura 13
Exemplos de aplicações de fibras microestruturadas preenchidas. a) Sensor bioquímico capaz de detectar seletivamente um tipo específico de anticorpo. BSA: bovine sérum albumin (adaptado da ref. 103). b) Imagens de microscopia eletrônica de uma fibra de cristal fotônico de núcleo oco funcionalizada com nanopartículas de Au (pontos claros) (adaptado da ref. 106). (c) Evolução temporal da absortividade molar em 500 nm e em 550 nm, indicando a fotólise da cianocobalamina, em um pH de 2,5, em uma cubeta (esquerda) e em uma fibra do tipo Kagomé (direita). Observar a diferença nas escalas temporais. φ: eficiência quântica do processo (adaptado da ref. 97)
Figura 14
Métodos de preenchimento de fibras microestruturadas com líquidos. (a) Preenchimento simples utilizando uma seringa. (b) Preenchimento seletivo de um dos canais através do colapso (por aquecimento) dos demais. (c) Preenchimento seletivo de um dos canais através da emenda com um capilar (alinhado com o canal desejado). (d) Preenchimento seletivo de um dos canais utilizando-se uma micropipeta
Figura 15
Métodos de inserção e remoção simultânea da luz e do líquido em fibras optofluídicas. (a) Método tradicional, utilizando cubeta (ou célula de pressão) com janela óptica e acoplamento através de lentes. Métodos com integração total a sistemas a fibra óptica, utilizando um furo transversal (b) ou uma fibra auxiliar, com capilares auxiliares, paralelos a um núcleo sólido (c)