SciELO - Scientific Electronic Library Online

 
vol.35 número6Eficiência técnica na indústria de base florestal brasileira via metas intermediáriasAvaliação do potencial do grits como material de construção na produção de tijolos de solo-cimento índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Revista Árvore

versão impressa ISSN 0100-6762

Resumo

CANTO, Juliana Lorensi do et al. Evaluation of a wood chipping system for eucalyptus tops for energy. Rev. Árvore [online]. 2011, vol.35, n.6, pp. 1327-1334. ISSN 0100-6762.  http://dx.doi.org/10.1590/S0100-67622011000700019.

The objective of this study was to evaluate the performance and to estimate costs of a wood chipping system for tree tops, which are considered residuals from wood harvesting, to be used for energy. The study was developed in a forest industry in the Para State, located in the north region of Brazil. The system was comprised by one wood chipper, two forwarders and one front loader. Data collection was based on time study, fuel consumption and chips load weighting. System average productivity was 17.51 tonnes per effective hour. Machine utilization rate was 51.9% due to many delays, mainly for repair and maintenance of the chipper. Chips transportation was considered to be the critical point of the system, due to some lack of trucks available for blowing chips. The system can produce between 94 and 162 times more energy than the energy consumed. System cost per effective hour was R$ 376.56, which means R$ 21.51/tonne of chips or R$ 2.70/GJ.

Palavras-chave : Forest biomass; Wood chipper; Renewable energy.

        · resumo em Português     · texto em Português     · pdf em Português