SciELO - Scientific Electronic Library Online

 
vol.36 número4Mapping permanent preservation areas and land use conflicts identification at the camapuã/brumado river basinDevelopment of recycled paper properties by ultrasonic treatment and addition of xylan índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

Compartir


Revista Árvore

versión impresa ISSN 0100-6762

Resumen

CARNEIRO, Angélica de Cássia Oliveira et al. Kinetic parameters of adhesives produced from tannin Anadenanthera peregrina and Eucalyptus grandis. Rev. Árvore [online]. 2012, vol.36, n.4, pp.767-775. ISSN 0100-6762.  http://dx.doi.org/10.1590/S0100-67622012000400018.

Due to the petroleum crisis in the Seventies, research had the objective of replace part or the entire conventional adhesive, based on petroleum. One way of replacement was the use of natural sources, as the tannins from some species of tree. However, the tannins present some use limitations, which can be overcome by sulfitation and acid hydrolysis. Therefore, the purpose of this study was evaluate the effect of tannina cid hydrolysis and sulfitation, extracted from the bark of Eucalyptus grandis and Anadenanthera peregrina in the kinetic parameters of tannin adhesives using the technique of differential scanning calorimetry (DSC). The tannins were hydrolyzed with acetic acid or hydrochloric acid 10N, using three pH values and three reaction times. The sulfitation was performed in a 5% sodium sulfite solution, in three reaction times. The activation energy, enthalpy and cure temperature of the adhesive were reduced by hydrolysis and sulfitation of tannins, but showed broadband polymerization. The tannins reaction time had no effect on the kinetic parameters.

Palabras clave : Differential scanning calorimetry (DSC); Wood adhesives; Natural adhesives.

        · resumen en Portugués     · texto en Portugués     · Portugués ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons