SciELO - Scientific Electronic Library Online

 
vol.37 número3SIMANIHOT: A PROCESS-BASED MODEL FOR SIMULATING GROWTH, DEVELOPMENT AND PRODUCTIVITY OF CASSAVASPRAY DRIFT AND PEST CONTROL FROM AERIAL APPLICATIONS ON SOYBEANS índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Engenharia Agrícola

versão impressa ISSN 0100-6916versão On-line ISSN 1809-4430

Resumo

LEITE, Daniel M. et al. DYNAMIC TRACTION OF A MECHANIZED SET BASED ON TECHNICAL AND OPERATIONAL PARAMETERS. Eng. Agríc. [online]. 2017, vol.37, n.3, pp.484-492. ISSN 0100-6916.  http://dx.doi.org/10.1590/1809-4430-eng.agric.v37n3p484-492/2017.

The objective of this study was to evaluate and model the traction performance parameters of a tractor 4x2 FWD, according to the tractor speed, the internal pressure and the type of tires construction. For each type of tire construction was assembled an experiment in which we evaluated the influence of internal pressures of the front and rear tires and the speed of the mechanical assembly. It was found that the sliding of the diagonal run, presented significant effect in all variables analyzed, since the radial showed no influence of the factors evaluated. The power available in the drawbar was higher when the tractor was equipped for radial tires. The response variables, fuel consumption schedule and specific fuel consumption were more sensitive to the speed of the internal tire pressure. The fuel consumption per area worked, did not affect the analyzed variables. As for the effort prediction models in the tractor drawbar, it was only possible for diagonal run, which are influenced by speed and internal pressure levels of the front and rear tires.

Palavras-chave : harrow disc; instrumentation; traction performance.

        · texto em Inglês     · Inglês ( pdf epdf )