SciELO - Scientific Electronic Library Online

 
vol.13 número4Suscetibilidade a antifúngicos de cepas de Candida albicans isoladas de pacientes com estomatite protéticaInfiltração marginal de agentes cimentantes em coroas metálicas fundidas índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Revista de Odontologia da Universidade de São Paulo

versão impressa ISSN 0103-0663

Resumo

TAROZZO, Luciana Silva Andrade et al. Evaluation of the resistance of metal-resin bond using mechanical and chemical retention systems. Rev Odontol Univ São Paulo [online]. 1999, vol.13, n.4, pp. 349-355. ISSN 0103-0663.  http://dx.doi.org/10.1590/S0103-06631999000400006.

The objective of the present investigation was to evaluate the resistance of metal-resin bonding using the Silicoater® MD system (Kulzer), five types of retention in the metal structure, and three commercial Ni-Cr alloys: Duceranium U, Wiron 99 and Wirocer. A total of 90 samples were submitted to the shearing test. Statistical analysis of the results permitted us to conclude that retention versus alloy interaction was statistically significant at a 1% level of probability, the highest mean value being obtained with the Wirocer alloy with mechanical retention with 0.6 mm spheres. The lowest mean values were observed with the Wiron 99 alloy with chemical retention.

Palavras-chave : Resins; Metals; Dental prosthesis; Denture retention.

        · resumo em Português     · texto em Português     · pdf em Português