SciELO - Scientific Electronic Library Online

 
vol.22 issue6Kinematic control of constrained robotic systemsChaos theory applied to input space representation of autonomous neural network-based short-term load forecasting models author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Sba: Controle & Automação Sociedade Brasileira de Automatica

Print version ISSN 0103-1759

Abstract

ENGLEITNER, Raffael et al. Normalized statical analysis with frequency and load variation for the class-E converter based on piezoelectric transformers. Sba Controle & Automação [online]. 2011, vol.22, n.6, pp. 573-584. ISSN 0103-1759.  http://dx.doi.org/10.1590/S0103-17592011000600003.

Piezoelectric transformers (PTs) allow the design of promising power supply applications, increasing efficiency, reducing size, facilitating the achievement of high transformation ratio, besides providing high immunity against electromagnetic noise. Due to the electrical equivalent model having resonant characteristics, some resonant topologies are used to build these power supplies, i.e. the Class-E converter. In order to make easier the analysis of high order converters, it's possible to use a normalized analysis method. The control of the Class-E converter using PTs is implemented through the switching frequency and duty cycle variation. The static gain is achieved though the switching frequency variation, while the duty cycle is adjusted with the purpose of achieving soft switching for different frequencies and loads. This paper shows a normalized analysis of this process, including a normalized frequency and load variation, without the need of design parameters. Experimental results for a 3W step-down converter are shown for a universal 85-260VAC input and out put voltage 6 V DC, to validate the proposed method.

Keywords : Class-E Converter; Resonant Converters; Piezoelectric Transformers; Normalized Circuits Analysis.

        · abstract in Portuguese     · text in English     · pdf in English