Shafer & Charnes (1993)
Shafer, S. M., & Charnes, J. M. (1993). Cellular versus functional layouts under a variety of shop operating conditions. Decision Sciences, 24(3), 665-682. http://dx.doi.org/10.1111/j.1540-5915.1993.tb01297.x. http://dx.doi.org/10.1111/j.1540-5915.1...
|
x |
|
x |
|
|
|
|
|
|
|
|
|
x |
|
|
|
|
|
|
|
Morris & Tersine (1994)
Morris, J. S., & Tersine, R. J. (1994). A simulation comparison of process and cellular layouts in a dual resource constrained environment. Computers & Industrial Engineering, 26(4), 733-741. http://dx.doi.org/10.1016/0360-8352(94)90008-6. http://dx.doi.org/10.1016/0360-8352(94)...
|
|
|
x |
|
|
|
|
|
|
|
|
|
x |
x |
|
|
|
|
|
|
Ertay (1998)
Ertay, T. (1998). Simulation approach in comparison of a pull system in a cell production system with a push system in a conventional production system according to flexible cost: A case study. International Journal of Production Economics, 56-57, 145-155. http://dx.doi.org/10.1016/S0925-5273(98)00035-8. http://dx.doi.org/10.1016/S0925-5273(98...
|
|
|
x |
|
|
|
|
|
|
|
|
|
x |
x |
|
|
|
|
|
|
Agarwal & Sarkis (2001)
Agarwal, A., & Sarkis, J. (2001). Evaluating functional and cellular manufacturing systems: a model and case analysis. International Journal of Manufacturing Technology and Management, 3(6), 528-549. http://dx.doi.org/10.1504/IJMTM.2001.001428. http://dx.doi.org/10.1504/IJMTM.2001.00...
|
x |
|
x |
|
|
|
|
|
|
|
|
|
|
x |
|
|
|
|
|
|
Bazargan-Cart & Nahavandi (2001)
Bazargan-Cart, M., & Nahavandi, S. (2001). The Impact of Cell Formation on Layout Designs in Cellular Manufacturing. Intelligent Automation & Soft Computing , 7(1), 13-22. http://dx.doi.org/10.1080/10798587.2001.10642800. http://dx.doi.org/10.1080/10798587.2001...
|
|
|
x |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
x |
|
|
Assad et al (2003)
Assad, A. A., Kramer, S. B., & Kaku, B. K. (2003). Comparing functional and cellular layouts: A simulation study based on standardization. International Journal of Production Research, 41(8), 1639-1663. http://dx.doi.org/10.1080/0020754021000049790. http://dx.doi.org/10.1080/0020754021000...
|
x |
|
x |
|
|
|
|
|
|
|
|
|
x |
x |
|
|
|
|
|
|
Drolet et al. (2008)
Drolet, J., Marcoux, Y., & Abdulnour, G. (2008). Simulation-based performance comparison between dynamic cells, classical cells and job shops: a case study. International Journal of Production Research, 46(2), 509-536. http://dx.doi.org/10.1080/00207540601138312. http://dx.doi.org/10.1080/0020754060113...
|
|
x |
x |
|
|
|
|
|
x |
|
|
|
|
x |
|
|
|
|
|
|
Rezazadeh et al. (2009)
Rezazadeh, H., Ghazanfari, M., Sadjadi, S. J., Aryanezhad, M., & Makui, A. (2009). Linear programming embedded particle swarm optimization for solving an extended model of dynamic virtual cellular manufacturing systems. Journal of applied research and technology , 7(1), 83-108.
|
|
|
|
|
|
|
|
|
x |
|
|
x |
|
|
|
|
|
|
|
|
Jayachitra et al. (2010)
Jayachitra, R., Revathy, R., & Prasad, P. S. S. (2010). A Fuzzy programming approach for formation of virtual cells under dynamic and uncertain conditions. International Journal of Engineering Science and Technology, 2(6), 1708-1724.
|
|
|
|
x |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
x |
|
Jerbi et al. (2010)
Jerbi, A., Chtourou, H., & Maalej, A. Y. (2010). Comparing functional and cellular layouts using simulation and Taguchi method. Journal of Manufacturing Technology Management , 21(5), 529-538. http://dx.doi.org/10.1108/17410381011046940. http://dx.doi.org/10.1108/1741038101104...
|
x |
|
x |
|
|
|
|
|
|
|
|
|
|
|
|
|
x |
|
|
|
Kamaruddin et al. (2011)
Kamaruddin, S., Khoo, S. Y., Khan, Z. A., & Siddiquee, A. N. (2011). The effect of layout design on productivity: an empirical study. International Journal of Productivity and Quality Management, 7(4), 484. http://dx.doi.org/10.1504/IJPQM.2011.040545. http://dx.doi.org/10.1504/IJPQM.2011.04...
|
x |
x |
x |
|
|
|
|
|
|
|
|
|
x |
x |
|
|
|
|
|
|
Rajapakshe et al. (2011)
Rajapakshe, T., Dawande, M., & Sriskandarajah, C. (2011). Quantifying the Impact of Layout on Productivity: An Analysis from Robotic-Cell Manufacturing. Operations Research, 59(2), 440-454. http://dx.doi.org/10.1287/opre.1100.0874. http://dx.doi.org/10.1287/opre.1100.087...
|
|
|
x |
|
|
|
|
|
|
|
|
|
|
x |
|
|
|
|
|
|
Jayachitra & Prasad (2011)
Jayachitra, R., & Prasad, P. S. S. (2011). Performance analysis of Virtual Cellular Manufacturing: a simulation study. International Journal of Services and Operations Management , 8(1), 92. http://dx.doi.org/10.1504/IJSOM.2011.037442. http://dx.doi.org/10.1504/IJSOM.2011.03...
|
x |
|
|
x |
x |
x |
|
|
|
|
|
|
|
x |
|
|
|
|
|
|
Mahdavi et al. (2011)
Mahdavi, I., Aalaei, A., Paydar, M. M., & Solimanpur, M. (2011). Multi-objective cell formation and production planning in dynamic virtual cellular manufacturing systems. International Journal of Production Research, 49(21), 6517-6537. http://dx.doi.org/10.1080/00207543.2010.524902. http://dx.doi.org/10.1080/00207543.2010...
|
|
|
|
|
|
|
|
|
x |
|
|
|
|
|
|
|
|
|
x |
|
Khilwani et al. (2011)
Khilwani, N., Ulutas, B. H., Islier, A. A., & Tiwari, M. K. (2011). A methodology to design virtual cellular manufacturing systems. Journal of Intelligent Manufacturing , 22(4), 533-544. http://dx.doi.org/10.1007/s10845-009-0314-6. http://dx.doi.org/10.1007/s10845-009-03...
|
|
|
|
|
x |
|
|
|
|
|
|
|
|
|
|
|
|
|
x |
|
Hamedi et al., 2012a
Hamedi, M., Esmaeilian, G. R., Napsiah, I., & Ariffin, M. K. A. (2012a). A survey on formation of virtual cellular manufacturing systems (VCMSs) and related issues. Scientific Research and Essays, 7(40), 3316-3328. http://dx.doi.org/10.5897/SRE11.217. http://dx.doi.org/10.5897/SRE11.217 ...
|
|
|
|
|
x |
|
|
|
|
|
|
|
|
|
|
|
|
|
x |
|
Hamedi et al. (2012b)
Hamedi, M., Esmaeilian, G. R., Napsiah, I., & Ariffin, M. K. A. (2012b). Capability-based virtual cellular manufacturing systems formation in dual-resource constrained settings using Tabu Search. Computers & Industrial Engineering, 62(4), 953-971. http://dx.doi.org/10.1016/j.cie.2011.12.020. http://dx.doi.org/10.1016/j.cie.2011.12...
|
|
|
|
|
x |
|
|
|
|
|
|
|
|
x |
|
|
|
|
x |
|
Hamedi et al. (2012c)
Hamedi, H., Ismail, N., Esmaeilian, G. R., & Ariffin, M. K. A. (2012c). Virtual cellular manufacturing system based on resource element approach and analyzing its performance over different basic layouts. International Journal of Industrial Engineering Computations , 3(2), 265-276. http://dx.doi.org/10.5267/j.ijiec.2011.07.002. http://dx.doi.org/10.5267/j.ijiec.2011....
|
|
|
|
|
x |
|
|
|
|
|
|
|
|
x |
|
|
|
|
x |
|
Khaksar-Haghani et al. (2012)
Khaksar-Haghani, F., Kia, R., Mahdavi, I., & Kazemi, M. (2012). A genetic algorithm for solving a multi-floor layout design model of a cellular manufacturing system with alternative process routings and flexible configuration. International Journal of Advanced Manufacturing Technology, 66(5-8), 845-865. http://dx.doi.org/10.1007/s00170-012-4370-2. http://dx.doi.org/10.1007/s00170-012-43...
|
|
|
|
|
x |
|
|
|
|
|
|
|
|
|
x |
|
|
|
|
|
Dias et al. (2014)
Dias, L. M. S., Pereira, G. A. B., Vik, P., & Oliveira, J. A. (2014). Layout and process optimisation: using computer-aided design (CAD) and simulation through an integrated systems design tool. International Journal of Simulation and Process Modelling, 9(1/2), 46. http://dx.doi.org/10.1504/IJSPM.2014.061437. http://dx.doi.org/10.1504/IJSPM.2014.06...
|
|
|
|
|
|
|
|
x |
|
|
|
x |
|
|
|
|
|
|
|
|
Medina-Herrera et al. (2014)
Medina-Herrera, N., Jiménez-Gutiérrez, A., & Grossmann, I. E. (2014). A mathematical programming model for optimal layout considering quantitative risk analysis. Computers & Chemical Engineering, 68, 165-181. http://dx.doi.org/10.1016/j.compchemeng.2014.05.019. http://dx.doi.org/10.1016/j.compchemeng...
|
|
|
|
|
|
|
|
x |
|
|
x |
|
|
|
|
|
|
|
|
|
Ramachandran & Prasad (2014)
Ramachandran, J., & Prasad, P. S. (2014). Facility layout selection guideline under dynamic demand and part variety. Journal of Engineering Technology, 4(1), 55. http://dx.doi.org/10.4103/0976-8580.123806. http://dx.doi.org/10.4103/0976-8580.123...
|
|
|
x |
x |
|
|
|
|
|
|
|
|
|
x |
|
|
|
|
|
x |
Mar-Ortiz et al. (2015)
Mar-Ortiz, J., Adenso-Díaz, B., & González-Velarde, J. L. (2015). A comparison of manufacturing and disassembly systems from a cellular configuration point of view. International Journal of Advanced Manufacturing Technology , 79(9-12), 2003-2016. http://dx.doi.org/10.1007/s00170-015-6969-6. http://dx.doi.org/10.1007/s00170-015-69...
|
|
|
x |
|
|
|
|
|
|
|
|
|
|
x |
|
|
|
|
|
|
Shafigh et al. (2015)
Shafigh, F., Defersha, F. M., & Moussa, S. E. (2015). A mathematical model for the design of distributed layout by considering production planning and system reconfiguration over multiple time periods. Journal of Industrial Engineering International , 11(3), 283-295. http://dx.doi.org/10.1007/s40092-015-0102-1. http://dx.doi.org/10.1007/s40092-015-01...
|
|
|
|
|
|
|
x |
|
|
|
x |
|
|
|
|
|
|
|
|
|
Paydar & Saidi-Mehrabad (2014)
Paydar, M. M., & Saidi-Mehrabad, M. (2014). Revised multi-choice goal programming for integrated supply chain design and dynamic virtual cell formation with fuzzy parameters. International Journal of Computer Integrated Manufacturing, 28(3), 251-265. http://dx.doi.org/10.1080/0951192X.2013.874596. http://dx.doi.org/10.1080/0951192X.2013...
|
|
|
x |
|
|
|
|
|
x |
|
x |
|
|
|
|
|
|
|
x |
|
Hamedi & Esmaeilian (2015)
Hamedi, M., & Esmaeilian, G. (2015, March 3-5). Functional and distributed layouts and their effectiveness on capability-based Virtual Cellular Manufacturing systems performance. In International Conference on Industrial Engineering and Operations Management . Dubai: IEEE. http://dx.doi.org/10.1109/IEOM.2015.7093847. http://dx.doi.org/10.1109/IEOM.2015.709...
|
x |
|
|
|
x |
|
x |
|
|
|
|
x |
|
|
|
|
|
|
|
|
Gupta et al. (2015)
Gupta, A., Jain, P. K., & Kumar, D. (2015). Configuration selection of reconfigurable manufacturing system based on performance. International Journal of Industrial and Systems Engineering, 20(2), 209. http://dx.doi.org/10.1504/IJISE.2015.069543. http://dx.doi.org/10.1504/IJISE.2015.06...
|
|
|
|
|
|
|
|
|
|
x |
|
|
|
|
|
|
|
|
|
x |
Sakhaii et al. (2016)
Sakhaii, M., Tavakkoli-Moghaddam, R., Bagheri, M., & Vatani, B. (2016). A robust optimization approach for an integrated dynamic cellular manufacturing system and production planning with unreliable machines. Applied Mathematical Modelling, 40(1), 169-191. http://dx.doi.org/10.1016/j.apm.2015.05.005. http://dx.doi.org/10.1016/j.apm.2015.05...
|
|
|
|
|
|
|
|
|
x |
|
|
x |
|
|
|
|
|
|
|
|
Deep & Singh (2016)
Deep, K., & Singh, P. K. (2016). Dynamic cellular manufacturing system design considering alternative routing and part operation tradeoff using simulated annealing based genetic algorithm. Shadana, 41(9), 1063-1079.
|
|
|
|
|
|
|
|
|
x |
|
|
|
|
|
|
x |
|
|
x |
|
Paydar & Saidi-Mehrabad (2017) Paydar, M. M., & Saidi-Mehrabad, M. (2017). A hybrid genetic algorithm for dynamic virtual cellular manufacturing with supplier selection. International Journal of Advanced Manufacturing Technology, 92(5-8), 3001-3017. http://dx.doi.org/10.1007/s00170-017-0370-6. http://dx.doi.org/10.1007/s00170-017-03...
|
|
|
|
|
|
|
|
|
x |
|
|
|
|
|
x |
|
|
|
x |
|
Rabbani et al. (2018)
Rabbani, M., Farrokhi-Asl, H., & Ravanbakhsh, M. (2018). Dynamic cellular manufacturing system considering machine failure and workload balance. Journal of Industrial Engineering International, 14(1), 1-16. http://dx.doi.org/10.1007/s40092-018-0261-y http://dx.doi.org/10.1007/s40092-018-02...
|
|
|
|
|
|
|
|
|
x |
|
|
|
x |
|
|
|
|
|
|
|