SciELO - Scientific Electronic Library Online

vol.39 issue5Soybean seed quality after harvesting with two types of harvester and two storage timesDopplervelocimetric evaluation of portal vein as a diagnostic tool for portosystemic shunt diagnosis in dogs author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand




Related links


Ciência Rural

On-line version ISSN 1678-4596


GOZELOTO, Marcelo  and  GONCALVES, Raquel. Carbon dioxide in fog form to refrigerate the cut tool during wood machining. Cienc. Rural [online]. 2009, vol.39, n.5, pp.1426-1432.  Epub Apr 17, 2008. ISSN 1678-4596.

Heat concentration from wood cutting process promotes the tool premature wear, with consequent effect on the surface processed material, causing burnt areas as well as provoking larger superficial roughness than observed in machining process with absence of accumulated heat. The objective of this research was to evaluate the effect of cutting tool refrigeration during wood machining. The adopted mechanism was the use of pressurized carbon dioxide in fog form applied directly in the cutting area as a refrigeration method. The test was performed using Eucalyptus grandis and as cutting tool, a circular saw. To evaluate the wood final surface the following parameters were adopted; superficial roughness and occurrence of surface carbonization. The results showed that carbon dioxide applied in fog form, even at the smallest level (15g min-1), avoided the superficial carbonization of the processed material, as well as reduced the values of superficial roughness.

Keywords : cutting wood; wood roughness; wood machining.

        · abstract in Portuguese     · text in Portuguese     · Portuguese ( pdf epdf )


Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License