The Hevea breeding program of Instituto Agronômico de Campinas (IAC) has completed clonal evaluation on the following series: IAC 100, IAC 200 and IAC 300. The performance of 22 clones of Hevea brasiliensis (Willd. ex Adr. de Juss.) Muell.-Arg., evolved at IAC, over a period of eleven years was evaluated in the Western Central part of the São Paulo State, Brazil. Among these 22 new clones, six were intraspecific hybrid clones (IAC 400, IAC 404, IAC 405, IAC 406, IAC 410, IAC 412) and the remaining are primary those resulted from selected ortets within half-sib progenies. An old popular clone RRIM 600, of Malaysian origin, was used as the control. The trial was laid out in a randomized block design with three replications. Yield performance over a period of four years, mean girth at the 11th year, girth increment before tapping and on tapping, thermal property of natural rubber produced, bark thickness, number of latex vessel rows in seven year virgin bark, percentage incidence of tapping panel dryness, wind damage and diseases like leaf and panel anthracnose have been observed. Sixty one percent of the clones were superior in relation to the control for yield. The clone IAC 400 recorded the highest yield (97.40 g tree-1 tap-1) over four years of tapping, followed by IAC 411 (78.87 tree-1 tap-1), whereas the control clone RRIM 600 recorded 50.86 g tree-1 tap-1. All selected clones were vigorous in growth. Girth increment of these clones was average to above average. Except for IAC 423, other clones had thick virgin bark at opening ranging from 4.84 mm for IAC 401 to 6.38 mm for IAC 416. The natural rubbers from IAC clones have shown good thermal stability up to 300ºC and no differences in the thermal behavior among rubber from clones of the IAC series and the clone RRIM 600 were found in inert atmosphere.
Hevea brasiliensis; yield; vigour; brown bast; bark thickness
