SciELO - Scientific Electronic Library Online

 
vol.40 número4Effect of thermo-mechanical parameters on microstructure and mechanical properties of microalloyed steels índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Brazilian Journal of Physics

versão impressa ISSN 0103-9733

Resumo

SISMANOGLU, B.N. et al. Optical and electrical diagnostics of microdischarges at moderate to high pressure in argon. Braz. J. Phys. [online]. 2010, vol.40, n.4, pp. 459-463. ISSN 0103-9733.  http://dx.doi.org/10.1590/S0103-97332010000400018.

Microdischarges at moderate to high pressure in argon were investigated. A hole opening diameter of 500 µm direct current (dc) microhollow cathode discharges (MHCD) were characterized by electrical measurements and optical emission spectroscopy (OES) for pressures ranging between 90 and 800 Torr and current from 5 to 20 mA. Current-voltage characteristic curves were obtained as a function of the pressure for this hole diameter. MHCD enables stable dc discharges for molybdenum electrodes material at constant Ar + 2%H2 flow of 0.03 l/min. Optical emission spectroscopy and analysis of the spectral line broadening of plasma line emissions were performed in order to measure gas discharge parameters. Electron number densities were obtained from Hβ Balmer line ( ~ 1014 cm-3). For the above mentioned discharge conditions, gas temperature was estimated to be 550 - 850 K from OH rotational bands. Excitation temperature was measured based on two lines method (from atomic Mo lines) and from 4p - 4s and 5p - 4s Ar radiative transitions. Hydrogen atom temperature was measured for 800 Torr ( ~ 12000 K).

Palavras-chave : Microdischarges; microhollow cathode discharges; optical emission spectroscopy.

        · texto em Inglês     · pdf em Inglês