SciELO - Scientific Electronic Library Online

 
vol.10 número2Determinação do parâmetro de solubilidade de poliuretanos de PBLHPropriedades mecânicas e morfologia de uma blenda polimérica de PP/HIPS compatibilizada com SEBS índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Polímeros

versão impressa ISSN 0104-1428versão On-line ISSN 1678-5169

Resumo

ZOPPI, Rita A.  e  SOARES, Claudia G. A.. Hybrids of poly(ethylene oxide-b-amide-6) and ZrO2 sol-gel: preparation, characterization and application in membrane separation processes. Polímeros [online]. 2000, vol.10, n.2, pp.70-81. ISSN 1678-5169.  http://dx.doi.org/10.1590/S0104-14282000000200009.

Hybrid films based on poly(ethylene oxide-b-amide-6), PEBAX, and zirconium oxide were prepared by hydrolysis and condensation of zirconium tetraisopropoxide in a 3wt% PEBAX/n-butanol solution. Films were characterized by thermogravimetric analysis, differential scanning calorimetry, infrared spectroscopy and electron microscopy. The results showed that the incorporation of the inorganic phase promoted the organic polymer degradation. Composite membranes constituted by a porous support of poly(vinylidene fluoride), PVDF, covered with a PEBAX/ZrO2 filter layer were prepared and characterized by electron microscopy. Tests including the permeation of water and aqueous solutions of poly(ethylene glycol) with different molecular weight were performed. Phosphate retention was also determined by permeation tests of a KH2PO4 aqueous solution. Regardless of the filter layer composition, phosphate retention was near to 80%.

Palavras-chave : Hybrids; sol-gel process; membranes; ZrO2 sol-gel.

        · resumo em Português     · texto em Português     · Português ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons