SciELO - Scientific Electronic Library Online

 
vol.11 número2Copolimerização micelar de poli(acrilamida-g-óxido de propileno): avaliação reológica e caracterização de suas soluçõesCaracterísticas e propriedades de quitosanas purificadas nas formas neutra, acetato e cloridrato índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Polímeros

versão impressa ISSN 0104-1428versão On-line ISSN 1678-5169

Resumo

BURAKOWSKI, Liliana  e  REZENDE, Mirabel C.. Carbon fibers roughness modification by chemical methods for application in polymeric composites. Polímeros [online]. 2001, vol.11, n.2, pp.51-57. ISSN 1678-5169.  https://doi.org/10.1590/S0104-14282001000200006.

The present work concerns the surface treatment of carbon fibers using hydrochloric and nitric acids treatment, so as to control the increase in surface roughness in order to improve the fiber/matrix interface of long fiber reinforced polymer composites. Sized carbon fibers from Toray were used. The samples were treated using hot hydrochloric and nitric acids (103°C) in concentrations of 35.5% and 97%, by weight respectively, at exposition times of 5, 10, 20, 30, 40 and 60 minutes. The chemically treated fibers were characterized by scanning electronic microscopy and tensile strength tests, assisted by Weibull statistics. It was found that the treatments employed modify the surface of the fibers and exposition periods longer than 20 minutes cause considerable degradation of their mechanical properties.

Palavras-chave : Carbon fibers; surface treatment; interface.

        · resumo em Português     · texto em Português     · Português ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons