SciELO - Scientific Electronic Library Online

 
vol.11 número2Propriedades mecânicas e resistência à chama de composições SBR/negro de fumo/hidróxido de alumínio índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Polímeros

versão impressa ISSN 0104-1428versão On-line ISSN 1678-5169

Resumo

GONCALVES, Adriano; ALMEIDA, Sérgio F. M.  e  LEVY NETO, Flaminio. Mechanical behavior of carbon/epoxy cylinders under axial compressive loads. Polímeros [online]. 2001, vol.11, n.2, pp.94-101. ISSN 1678-5169.  https://doi.org/10.1590/S0104-14282001000200012.

The requirements of low weight and dimensional stability, combined with high strength and stiffness, for aerospace structures has prompted an increasing use of fiber reinforced materials in manufacturing such structures. In particular, carbon/epoxy cylinders have been widely used in aerospace applications. In this work, an experimental program was developed to determine failure loads, modulus of elasticity and failure modes of 47 carbon/epoxy cylinders shells under compressive loads. The specimens tested had several different length/diameter (from 2.50 to 11.25) ratios and laminate lay-up. These results were compared to the analytical results from finite element code and the most important factors influencing the mechanical behavior of this type of structure were analyzed.

Palavras-chave : Composite materials; compression; carbon fiber; epoxy; cylinder.

        · resumo em Português     · texto em Português     · Português ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons