SciELO - Scientific Electronic Library Online

 
vol.12 número2Studies on Anionic Surfactant Structure in the Aggregation with (Hydroxypropyl)celluloseEncapsulamento do Dióxido de Titânio (TiO2) pela Técnica de Polimerização em Emulsão índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Polímeros

versão impressa ISSN 0104-1428versão On-line ISSN 1678-5169

Resumo

OGAWA, Claudia A.  e  PLEPIS, Ana Maria G.. In Vitro Release of Ciprofloxacin in Hydroxyapatite: Collagen Composites. Polímeros [online]. 2002, vol.12, n.2, pp.115-122. ISSN 1678-5169.  https://doi.org/10.1590/S0104-14282002000200011.

Hydroxyapatite: collagen (HA:col) composites were prepared in different proportions in order to obtain the best one to incorporate ciprofloxacin. Collagen with alkaline treatment (24 and 48h) was used. The best HA:col proportion was found to be 10: 1 (w/w) wich was used for ciprofloxacin incorporation and release studies. Release experiments in vitro were made in saline phosphate buffers (PBS), pH 7.4, at 37°C, showing a maximum release approximately 90% for HA:col 24h and 75% for HA:col 48h, after 10 hours of immersion. The ciprofloxacin delivery in the composites is controlled by matrix porous since it follows Higuchi's model. Results indicate that different times of alkaline treatment of collagen affect the antibiotic delivery rate. A different quantity of charges in collagens within 24h and 48h would induce a different interaction between the composite and the antibiotic.

Palavras-chave : Hydroxyapatite; collagen; controlled delivery; ciprofloxacin.

        · resumo em Português     · texto em Português     · Português ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons