SciELO - Scientific Electronic Library Online

 
vol.13 issue1A treatment of residue from polymer laboratories: a successful case of university and private company partnershipEffect of the compatibilization of NBR/EVA blends on co-continuous morphology author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

Share


Polímeros

Print version ISSN 0104-1428On-line version ISSN 1678-5169

Abstract

PINHO, Magali S.; SEBRAO, Mauro Z.; NUNES, Regina C. R.  and  SOARES, Bluma G.. The effect from the exposure to salt spray on the corrosive process of ferromagnetic composites with polychloroprene. Polímeros [online]. 2003, vol.13, n.1, pp.22-27. ISSN 0104-1428.  http://dx.doi.org/10.1590/S0104-14282003000100007.

The corrosive effect from the exposure to salt spray was studied on chloroprene rubber (CR) matrices containing a particulate ferromagnetic filler, viz. carbonyl-iron powder (CIP). The experiments in salt spray chamber are able to create an aggressive condition of sodium chloride atmosphere (NaCl), being important to minimize the time of exposure of composites in comparison to the real conditions. The presence of corrosive products was visually observed at the surface of CI:CR composites (80:20 wt %). The surface and interior of these composites were characterized by scanning electron microscopy (SEM), equipped with an energy-dispersive X-ray (EDX) analysis system. From these experiments, it was possible to suggest the formation of a surface layer of iron oxide (Fe2O3). This compound was not detected inside the bulk.

Keywords : Carbonyl-iron; chloroprene rubber; salt spray exposure; corrosion.

        · abstract in Portuguese     · text in Portuguese     · Portuguese ( pdf epdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License