SciELO - Scientific Electronic Library Online

 
vol.15 número3Efeito da massa molar e do teor de poliuretano nas propriedades mecânicas de misturas poli(metacrilato de metila)/poliuretanoCompósitos de HDPE com resíduos de fibras têxteis. Parte I: caracterização mecânica índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Polímeros

versão impressa ISSN 0104-1428versão On-line ISSN 1678-5169

Resumo

SANTANA, Ruth M. C.  e  MANRICH, Sati. Blown films of post-consumer thermoplastic composites: thermal and mechanical analyses. Polímeros [online]. 2005, vol.15, n.3, pp.163-170. ISSN 1678-5169.  https://doi.org/10.1590/S0104-14282005000300005.

Ternary composites from post-consumer waste of polypropylene (PP), high impact polystyrene (HIPS) and calcium carbonate (CaCO3) were prepared to obtain films of synthetic paper and to evaluate their thermal and mechanical properties. These composites filled with 10, 20 and 30 % wt of CaCO3 were film blown extruded under two conditions of screw rotation: 32 and 51 rpm. The composite film orientation was determined with the parameters along the longitudinal axis (Rl), transverse axis (Rt) and Rl/Rt ratio (Rc). Differential scanning calorimetry (DSC) and tensile and tear strength tests were used to study the thermal and mechanical properties of the films, showing their dependence on composition and orientation degree. Composite films with higher filler concentration exhibited a decreased tensile strength, but a less significant effect on tensile modulus. The tear strength was strongly dependent on the degree of film orientation.

Palavras-chave : Composites; films; recycling; polypropylene; high impact polystyrene.

        · resumo em Português     · texto em Português     · Português ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons