SciELO - Scientific Electronic Library Online

 
vol.15 número3Filmes tubulares de compósitos de termoplásticos pós-consumo: análise térmica e mecânicaEvolução da morfologia de fases de blendas PA6/AES em extrusora de dupla rosca e moldagem por injeção índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Polímeros

versão impressa ISSN 0104-1428versão On-line ISSN 1678-5169

Resumo

FINKLER, Maira et al. HDPE composites with textile fibers waste. Part I: mechanical characterization. Polímeros [online]. 2005, vol.15, n.3, pp.171-175. ISSN 1678-5169.  https://doi.org/10.1590/S0104-14282005000300006.

In this work, results of mechanical properties of new composites based on textile fiber residues from clothing industry and commodity polymers are discussed. Natural fibers offer some advantages over synthetic ones, regarding mechanical and thermal properties. The composites were produced by mixing high density polyethylene with the textile fibers (50% cotton /50% acrylic) in increasing contents, from 10 to 40% in a thermokinetic mixer, using Surlyn 2601, Polybond 3009 and Polybond 1009 as coupling agents. The tensile, flexural and impact samples were produced by cutting sheets obtained in a hydraulic press. The composites with coupling agents showed good results of tensile and flexural strength, mainly with 5% of Polybond 3009 and 20-40% of textile fiber residues.

Palavras-chave : Recycling; textile fibers; high density polyethylene.

        · resumo em Português     · texto em Português     · Português ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons