SciELO - Scientific Electronic Library Online

 
vol.16 número3Avaliação do uso de técnicas PIR-G/FT-IR para caracterização de elastômerosMateriais poliméricos para tratamento de água oleosa: utilização, saturação e regeneração índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Polímeros

versão impressa ISSN 0104-1428versão On-line ISSN 1678-5169

Resumo

BISSOTO, Isaias  e  SYDENSTRICKER, Thais H.. Substitution of polyphthalamide (PPA) used in the fuel tank cap lid of a car by other polymers. Polímeros [online]. 2006, vol.16, n.3, pp.217-233. ISSN 1678-5169.  https://doi.org/10.1590/S0104-14282006000300011.

In this study, we evaluated the possible replacement of polyphthalamide (PPA) at the fuel tank cap lid of a car by other polymers. Various materials selectors available in the Internet were used to identify possible substitute materials to PPA. This material is a high-performance, high-cost, difficult-to-process polymer, which is not produced in Brazil. Despite its applicability to automotive parts due to its outstanding properties, its substitution by other polymers would imply in a series of advantages for the process of parts production. After the selectors' usage, a series of enhancements to these sites were suggested in order to make it possible to create a better layout of a materials selector for a future implementation. This study's final evaluation compares the final results obtained from the selectors with those from the local polymer suppliers.

Palavras-chave : Materials selector; polyphthalamide; PPA; PC/PBT; automotive industry; logistics.

        · resumo em Português     · texto em Português     · Português ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons