SciELO - Scientific Electronic Library Online

 
vol.17 número1Estudo de caso de peça moldada pelo processo de injeção-compressão para termoplásticos utilizando análise computacionalAvaliação da orientação molecular de moldados de polipropileno utilizando figuras de pólo obtidas por difração de raios X índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Polímeros

versão impressa ISSN 0104-1428versão On-line ISSN 1678-5169

Resumo

ZANCHET, Aline et al. Cure characteristics, mechanical properties and morphology of composites developed with addition of elastomeric vulcanized ground scraps. Polímeros [online]. 2007, vol.17, n.1, pp.23-27. ISSN 1678-5169.  https://doi.org/10.1590/S0104-14282007000100008.

One alternative for elastomeric scraps generation is its incorporation in conventional formulations in the industry itself. In this work, compositions with incorporation of SBR (styrene butadiene rubber) and EPDM (ethylene propylene diene rubber) industrial scraps, in specific ASTM formulation for each elastomer, were prepared. Rheometric characteristics, mechanical properties and the morphology of the compounds developed were evaluated. With the ground scraps incorporation the vulcanization time decreases, comparing with compounds without ground scraps. The amount of scraps for the best tensile strength properties was 37 and 196 phr for SBR and EPDM compositions, respectively. Micrographs corroborated the mechanical results, indicating the best homogeneity of the scraps in the elastomeric matrix for these compositions.

Palavras-chave : SBR ground scraps; EPDM ground scraps; elastomeric compounds; mechanical properties; cure characteristics.

        · resumo em Português     · texto em Português     · Português ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons