SciELO - Scientific Electronic Library Online

 
vol.17 número2Moldagem por injeção da PA 6.6 em moldes de estereolitografia metalizados com Ni-P pelo processo electrolessObtenção de compósitos de resíduos de ardósia e polipropileno índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Polímeros

versão impressa ISSN 0104-1428versão On-line ISSN 1678-5169

Resumo

GALIANI, Patrini D.; MALMONGE, José A.; SANTOS, Daniela P. dos  e  MALMONGE, Luiz F.. Composites of natural rubber with polyaniline. Polímeros [online]. 2007, vol.17, n.2, pp.93-97. ISSN 1678-5169.  https://doi.org/10.1590/S0104-14282007000200007.

In this work composites with different compositions were obtained from natural rubber (Hevea brasiliensis) (NR) and polyaniline (PANI) using the emulsion polymerization of aniline in the presence of NR and dodecylbenzenesulfonic acid (DBSA). The samples in film form were obtained by pressing the precipitate at 100 °C for 5 minutes. The composites were characterized by electrical conductivity, Fourier-transform infrared spectroscopy (FTIR), UV-vis-NIR spectroscopy, differential scanning calorimetry (DSC) and X ray diffraction. Composites with electrical conductivity about 14 orders of magnitude higher than NR were obtained. The UV-vis-NIR and FTIR spectra showed that PANI-DBSA was formed in the composites, thus making it responsible for their high conductivity. The DSC thermograms indicated that the two polymers are immiscible and X ray diffraction evidenced that NB does not considerably affect PANI-DBSA crystalline phase in the composite.

Palavras-chave : Emulsion polymerization; natural rubber; polyaniline.

        · resumo em Português     · texto em Português     · Português ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons