SciELO - Scientific Electronic Library Online

 
vol.22 número2Tenacificação do poli(ácido lático) pela adição do terpolímero (etileno/acrilato de metila/metacrilato de glicidila)Eletrofiação de polímeros em solução: parte II: aplicações e perspectivas índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Polímeros

versão impressa ISSN 0104-1428

Resumo

COSTA, Rodrigo G. F. et al. Electrospinning of polymers in solution: part I: theoretical foundation. Polímeros [online]. 2012, vol.22, n.2, pp.170-177.  Epub 08-Maio-2012. ISSN 0104-1428.  https://doi.org/10.1590/S0104-14282012005000026.

The electrospinning technique has been known since the 1930s, but only with the advent of new nanotechnology applications this technique was re-discovered and became important for production of nanomaterials. The potential for obtaining different nanofibers with sizes ranging from 50 to 500 nm and micrometer length has been investigated for different materials, with promising results in different applications. The first part of this review is aimed at describing the fundamentals of the electrospinning process. We describe the influence of process variables such as applied field, working distance, speed of rotation of the collector and solution injecting flow rate. The variables associated to this system, such as type of solvent and polymer of interest, are also discussed.

Palavras-chave : Electrospinning; polymers; nanofibers; process parameters; solution parameters.

        · resumo em Português     · texto em Português     · Português ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons