SciELO - Scientific Electronic Library Online

 
vol.23 número5Goma de cajueiro (Anacardium occidentale): Avaliação das modificações químicas e físicas por extrusão termoplásticaSal de iodônio aumenta a resistência coesiva de uma resina adesiva experimental na presença de solvente índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Polímeros

versão impressa ISSN 0104-1428

Resumo

ALVES, Tatianny Soares et al. Effect of CIS-13-docosenamide cointercalation on the morphology and mechanical properties of polypropylene/organoclay composites. Polímeros [online]. 2013, vol.23, n.5, pp.672-677.  Epub 15-Out-2013. ISSN 0104-1428.  http://dx.doi.org/10.4322/polimeros.2013.011.

PP/organoclay/PP-g-MA/erucamide composites with 5% commercial organo-montmorillonite (Cloisite 20A), 5 and 15% maleated polypropylene as compatibilizer, and 0, 0.5 and 1% erucamide as a co-intercalating agent were prepared by melt intercalation. A masterbatch of compatibilizer and organoclay was compounded in an internal mixer and then diluted in the polypropylene matrix in a corotating twin-screw extruder. The compounds were characterized by x-ray diffraction, optical microscopy and mechanical properties. Results indicate that the organoclay acted as a reinforcer. Addition of the co-intercalating agent significantly increased the interlayer spacing of the clay, without notably affecting the mechanical behavior of the composites. Optical microscopy showed the dispersive effect of the screw profile used, which promoted the breaking of clay agglomerates.

Palavras-chave : Polypropylene; nanocomposites; cointercalant; mechanical properties.

        · resumo em Português     · texto em Português     · Português ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons