SciELO - Scientific Electronic Library Online

vol.24 número3Characterization of additives typically employed in EPDM formulations by using FT-IR of gaseous pyrolyzates índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados




Links relacionados



versão impressa ISSN 0104-1428


FLEMING, Robson et al. Synthesis and thermal behavior of polyacrylonitrile/vinylidene chloride copolymer. Polímeros [online]. 2014, vol.24, n.3, pp.259-268.  Epub 27-Maio-2014. ISSN 0104-1428.

Polyacrylonitrile fiber encompasses a broad range of products based on acrylonitrile (AN) which is readily copolymerized with a wide range of ethylenic unsaturated monomers giving rise to polymers with different characteristics and applications. Such products can be designed for cost-effective, flame and heat resistant solutions for the textile industry, aircraft and automotive markets. In the present work acrylonitrile was copolymerized with vinylidene chloride (VDC) by conventional suspension polymerization process via redox system, with an initial content of 10%/mass of the VDC monomer. The copolymer average molecular weight was obtained by Gel Permeation Chromatography (GPC) and by intrinsic viscosity analysis. To control the polymerization process continuously, qualitative and quantitative analysis of the chloride content in the PAN AN/VDC copolymer structure was accomplished by using X-ray fluorescence and potentiometric titration techniques. A good correlation was found between these two techniques, leading to a straightforward verification of VDC in the polymer structure. The thermal behavior of PAN AN/VDC copolymer was performed by Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA). The results showed that VDC monomers exhibited a nearly stoichiometric reaction with acrylonitrile, copolymerizing about 90% of its initial mass. VDC changed significantly the polyacrylonitrile thermal behavior, decreasing the polymer degradation temperature by about 40-50°C.

Palavras-chave : Acrylonitrile; vinylidene chloride; suspension polymerization; molecular weight; thermal behavior.

        · texto em Inglês     · Inglês ( pdf )


Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons