SciELO - Scientific Electronic Library Online

 
vol.25 número1Estudo das propriedades elétricas e térmicas de compósitos nanoestruturados de poli(sulfeto de fenileno) reforçados com nanotubos de carbonoAnálise numérica da pressão de ruptura de tubos à base de borracha e cordonéis poliméricos índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Polímeros

versão impressa ISSN 0104-1428

Resumo

LOMBARDO, Patrícia Coelho; POLI, Alessandra Lima  e  SCHMITT, Carla Cristina. Influence of stabilizers on photo-oxidative degradation of SWy-1/poly (ethylene oxide) composite films. Polímeros [online]. 2015, vol.25, n.1, pp.101-108. ISSN 0104-1428.  https://doi.org/10.1590/0104-1428.1604.

Poly(ethylene oxide) (PEO) with SWy-1 montmorillonite and stabilizers (2-hydroxybenzophenone and tinuvin 770) composites were prepared by intercalation in solution method. The films of the composites were exposed to UV irradiation. The photodegradation products were monitored by FTIR (Fourier Transform Infrared Spectroscopy) and SEC (Size Exclusion Chromatography) method. The PEO pure showed higher degradation rate coefficients, kd , compared to the others samples. The system that showed the lowest value for the degradation rate coefficients (kd = 1.9×10–6 mol g –1 h –1) was the PEO/SWy-1 5% composite with 0.25% of tinuvin 770. In this case, the stabilization of the PEO matrix can be attributed to clay associated with tinuvin 770. The clay scatters and absorbs UV irradiation and tinuvin acts as a stabilizer of the HALS (hindered amine light stabilizers) kind.

Palavras-chave : poly(ethylene oxide); montmorillonite; photostabilizers; photooxidative degradation.

        · resumo em Português     · texto em Português     · Português ( pdf )