SciELO - Scientific Electronic Library Online

 
vol.26 número3Low cost UV-Ozone reactor mounted for treatment of electrode anodes used in P-OLEDs devicesRheological properties and curing features of natural rubber compositions filled with fluoromica ME 100 índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Polímeros

versão impressa ISSN 0104-1428versão On-line ISSN 1678-5169

Resumo

AHMADI, Ebrahim; GATABI, Javad  e  MOHAMADNIA, Zahra. Preparation and characterization of Zn(II) ion-imprinted polymer based on salicylic acrylate for recovery of Zn(II) ions. Polímeros [online]. 2016, vol.26, n.3, pp.242-248.  Epub 22-Ago-2016. ISSN 1678-5169.  https://doi.org/10.1590/0104-1428.2322.

This work describes the synthesis of new ion-imprinted polymers (IIPs) for selective solid phase extraction of Zn(II) ions from aqueous samples. IIPs were synthesized by copolymerization of salicylic acrylate (SA) as a functional monomer and ethylene glycol dimethacrylate (EGDMA) as a crosslinker in the presence of 2,2’-azobisisobutyronitrile (AIBN) as an initiator. The template ions were removed from IIPs particles by leaching with 0.1 M Ethylenediaminetetraacetic acid (EDTA) which leaves cavities in the particles with the capability of selective extraction of the Zn(II) ions. The monomer and the polymer after synthesis have been characterized by 1H NMR, 13C NMR and FT-IR studies. The effect of the pH on the extraction efficiency of Zn(II) ions was studied and optimized in pH around 6. The selectivity of the synthesized IIPs was studied in the presence of Co(II), Cd(II) and Ni(II) ions, and the IIPs showed higher affinity for Zn(II) in the presence of other interfering ions.

Palavras-chave : ion-imprinted polymers; salicylic acrylate; solid phase extraction; Zinc (II) ions.

        · texto em Inglês     · Inglês ( pdf )