SciELO - Scientific Electronic Library Online

 
vol.27 número2Evaluation of silanes in SBR 1502 / Telinne Monspessulana flour compositesInfluence of microcrystalline cellulose in thermoplastic starch/polyester blown films índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Polímeros

versão impressa ISSN 0104-1428versão On-line ISSN 1678-5169

Resumo

RIVAS, Leonardo Fábio et al. Reprocessability of PHB in extrusion: ATR-FTIR, tensile tests and thermal studies. Polímeros [online]. 2017, vol.27, n.2, pp.122-128.  Epub 29-Jun-2017. ISSN 1678-5169.  https://doi.org/10.1590/0104-1428.2406.

Mechanical recycling of biodegradable plastics has to be encouraged, since the consumption of energy and raw materials can be reduced towards a sustainable development in plastics materials. In this study, the evolution of thermal and mechanical properties, as well as structural changes of poly(hydroxybutyrate) (PHB) up to three extrusion cycles were investigated. Results indicated a significant reduction in mechanical properties already at the second extrusion cycle, with a reduction above 50% in the third cycle. An increase in the crystallinity index was observed due to chemicrystallization process during degradation by chain scission. On the other hand, significant changes in the chemical structure or in thermal stability of PHB cannot be detected by Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analyses (TGA), respectively.

Palavras-chave : biopolymer; degradation; PHB; recycling; reprocessing.

        · texto em Inglês     · Inglês ( pdf )