SciELO - Scientific Electronic Library Online

 
vol.27 número3Sulfonation degree effect on ion-conducting SPEEK-titanium oxide membranes properties índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Polímeros

versão impressa ISSN 0104-1428versão On-line ISSN 1678-5169

Resumo

PINTAO, Carlos Alberto Fonzar  e  CARDOSO, Celso Xavier. Elastic modulus of PVDF with bentonite or LiNbO3 using deformation energy. Polímeros [online]. 2017, vol.27, n.3, pp.183-188.  Epub 21-Set-2017. ISSN 1678-5169.  https://doi.org/10.1590/0104-1428.06016.

Polyvinylidene fluoride (PVDF) is valued for its properties of transparency to light, lightness, flexibility, mechanical strength, chemical stability, ease of processing, and low-cost production. Ceramics have low mechanical strength and poor processability, but have excellent piezo- and pyroelectric characteristics. The deficiencies of ceramics can be minimized by combining them with polymers. Accordingly, PVDF samples with different percentages of bentonite or LiNbO3 were used to obtain composites via “casting,” and the modulus of elasticity (E) of the composites was studied using a specially designed system. The method used to obtain E took into account the strain energy and the strength of the materials. Based on the results, E decreased with an increased percentage of bentonite and, in the case of LiNbO3, for the percentages of 30% and 35% increases.

Palavras-chave : bentonite; deformation energy; LiNbO3; modulus of elasticity; PVDF.

        · texto em Inglês     · Inglês ( pdf )