PWH |
41.4 ± 0.7 |
18.6 ± 0.3 |
9.6 ± 0.4 |
73.9 ± 2.0 |
0.95 ± 0.06 |
1.00 ± 0.06 |
PEHD Recycled |
62.0 ± 0.79[2727 Caraschi, J. C., & Leão, A. L. (2002). Avaliação das propriedades mecânicas dos plásticos reciclados provenientes de resíduos sólidos urbanos. Acta Scientiarum, 24(6), 1599-1602. ]
|
18.99 ± 0.45[2727 Caraschi, J. C., & Leão, A. L. (2002). Avaliação das propriedades mecânicas dos plásticos reciclados provenientes de resíduos sólidos urbanos. Acta Scientiarum, 24(6), 1599-1602. ]
|
20.73 ± 0.44[2727 Caraschi, J. C., & Leão, A. L. (2002). Avaliação das propriedades mecânicas dos plásticos reciclados provenientes de resíduos sólidos urbanos. Acta Scientiarum, 24(6), 1599-1602. ]
|
------------ |
< 0.01[2828 Coutinho, F. M. B., Mello, I. L., & Santa Maria, L. C. (2003). Polietileno: principais tipos, propriedades e aplicações. Polímeros: Ciência e Tecnologia, 13(1), 1-3. ,2929 Milagres, E. G., Vital, B. R., Della, L. R. M., & Pimenta, A. S. (2006). Compósitos de partículas de madeira de Eucalyptus grandis, polipropileno e polietileno de alta e baixa densidades. Revista Árvore, 30(3), 463-470. http://dx.doi.org/10.1590/S0100-67622006000300017. http://dx.doi.org/10.1590/S0100-6762200...
]
|
0.94-0.98[2828 Coutinho, F. M. B., Mello, I. L., & Santa Maria, L. C. (2003). Polietileno: principais tipos, propriedades e aplicações. Polímeros: Ciência e Tecnologia, 13(1), 1-3. ,2929 Milagres, E. G., Vital, B. R., Della, L. R. M., & Pimenta, A. S. (2006). Compósitos de partículas de madeira de Eucalyptus grandis, polipropileno e polietileno de alta e baixa densidades. Revista Árvore, 30(3), 463-470. http://dx.doi.org/10.1590/S0100-67622006000300017. http://dx.doi.org/10.1590/S0100-6762200...
]
|
------------ |
≅ 20.5[22 Fávaro, S. L., Ganzerli, T. A., Carvalho, A. G. V. No, Silva, O. R. R. F., & Radovanovic, E. (2010). Chemical, morphological and mechanical analysis of sisal fiber-reinforced recycled high-density polyethylene composites. Express Polymer Letters, 4(8), 465-473. http://dx.doi.org/10.3144/expresspolymlett.2010.59. http://dx.doi.org/10.3144/expresspolyml...
]
|
≅ 21.0[22 Fávaro, S. L., Ganzerli, T. A., Carvalho, A. G. V. No, Silva, O. R. R. F., & Radovanovic, E. (2010). Chemical, morphological and mechanical analysis of sisal fiber-reinforced recycled high-density polyethylene composites. Express Polymer Letters, 4(8), 465-473. http://dx.doi.org/10.3144/expresspolymlett.2010.59. http://dx.doi.org/10.3144/expresspolyml...
]
|
≅ 46.5 [22 Fávaro, S. L., Ganzerli, T. A., Carvalho, A. G. V. No, Silva, O. R. R. F., & Radovanovic, E. (2010). Chemical, morphological and mechanical analysis of sisal fiber-reinforced recycled high-density polyethylene composites. Express Polymer Letters, 4(8), 465-473. http://dx.doi.org/10.3144/expresspolymlett.2010.59. http://dx.doi.org/10.3144/expresspolyml...
]
|
|
|
64.0[3030 Hillig, E., Freire, E., Carvalho, G. A., Schneider, V. E., & Pocai, K. (2006). Moldagem de misturas na fabricação de compósitos polímero-fibra utilizando polietileno e serragem de pinus sp. Ciência Florestal , 16(3), 343-351. http://dx.doi.org/10.5902/198050981913. http://dx.doi.org/10.5902/198050981913 ...
]
|
24.87[3030 Hillig, E., Freire, E., Carvalho, G. A., Schneider, V. E., & Pocai, K. (2006). Moldagem de misturas na fabricação de compósitos polímero-fibra utilizando polietileno e serragem de pinus sp. Ciência Florestal , 16(3), 343-351. http://dx.doi.org/10.5902/198050981913. http://dx.doi.org/10.5902/198050981913 ...
]
|
25.66[3030 Hillig, E., Freire, E., Carvalho, G. A., Schneider, V. E., & Pocai, K. (2006). Moldagem de misturas na fabricação de compósitos polímero-fibra utilizando polietileno e serragem de pinus sp. Ciência Florestal , 16(3), 343-351. http://dx.doi.org/10.5902/198050981913. http://dx.doi.org/10.5902/198050981913 ...
]
|
33.9[3030 Hillig, E., Freire, E., Carvalho, G. A., Schneider, V. E., & Pocai, K. (2006). Moldagem de misturas na fabricação de compósitos polímero-fibra utilizando polietileno e serragem de pinus sp. Ciência Florestal , 16(3), 343-351. http://dx.doi.org/10.5902/198050981913. http://dx.doi.org/10.5902/198050981913 ...
]
|
|
|
PEHD Virgin |
62.9 ± 0.55[2727 Caraschi, J. C., & Leão, A. L. (2002). Avaliação das propriedades mecânicas dos plásticos reciclados provenientes de resíduos sólidos urbanos. Acta Scientiarum, 24(6), 1599-1602. ]
|
------------- |
24.53 ± 0.12[2727 Caraschi, J. C., & Leão, A. L. (2002). Avaliação das propriedades mecânicas dos plásticos reciclados provenientes de resíduos sólidos urbanos. Acta Scientiarum, 24(6), 1599-1602. ]
|
------------ |
|
|
65.0[3030 Hillig, E., Freire, E., Carvalho, G. A., Schneider, V. E., & Pocai, K. (2006). Moldagem de misturas na fabricação de compósitos polímero-fibra utilizando polietileno e serragem de pinus sp. Ciência Florestal , 16(3), 343-351. http://dx.doi.org/10.5902/198050981913. http://dx.doi.org/10.5902/198050981913 ...
]
|
24.87[2828 Coutinho, F. M. B., Mello, I. L., & Santa Maria, L. C. (2003). Polietileno: principais tipos, propriedades e aplicações. Polímeros: Ciência e Tecnologia, 13(1), 1-3. ]
|
24.73[3030 Hillig, E., Freire, E., Carvalho, G. A., Schneider, V. E., & Pocai, K. (2006). Moldagem de misturas na fabricação de compósitos polímero-fibra utilizando polietileno e serragem de pinus sp. Ciência Florestal , 16(3), 343-351. http://dx.doi.org/10.5902/198050981913. http://dx.doi.org/10.5902/198050981913 ...
]
|
38.34[3030 Hillig, E., Freire, E., Carvalho, G. A., Schneider, V. E., & Pocai, K. (2006). Moldagem de misturas na fabricação de compósitos polímero-fibra utilizando polietileno e serragem de pinus sp. Ciência Florestal , 16(3), 343-351. http://dx.doi.org/10.5902/198050981913. http://dx.doi.org/10.5902/198050981913 ...
]
|
|
|
------------ |
19.76 ± 0.39[3131 Runzhou, H., Xinwu, X., Sunyoung, L., Yang, Z., Birm-June, K., & Qinglin, W. (2013). High Density Polyethylene composites reinforced with hybrid inorganic fillers: morphology, mechanical and thermal expansion performance. Matéria (Rio de Janeiro) , 6(9), 4122-4138. http://dx.doi.org/10.3390/ma6094122. PMid:28788322. http://dx.doi.org/10.3390/ma6094122 ...
]
|
18.9 ± 0.2[3131 Runzhou, H., Xinwu, X., Sunyoung, L., Yang, Z., Birm-June, K., & Qinglin, W. (2013). High Density Polyethylene composites reinforced with hybrid inorganic fillers: morphology, mechanical and thermal expansion performance. Matéria (Rio de Janeiro) , 6(9), 4122-4138. http://dx.doi.org/10.3390/ma6094122. PMid:28788322. http://dx.doi.org/10.3390/ma6094122 ...
]
|
------------ |
|
|
PP Recycled |
68.2 ± 0.57[2727 Caraschi, J. C., & Leão, A. L. (2002). Avaliação das propriedades mecânicas dos plásticos reciclados provenientes de resíduos sólidos urbanos. Acta Scientiarum, 24(6), 1599-1602. ]
|
41.74 ± 0.49[2727 Caraschi, J. C., & Leão, A. L. (2002). Avaliação das propriedades mecânicas dos plásticos reciclados provenientes de resíduos sólidos urbanos. Acta Scientiarum, 24(6), 1599-1602. ]
|
28.96 ± 0.67[2727 Caraschi, J. C., & Leão, A. L. (2002). Avaliação das propriedades mecânicas dos plásticos reciclados provenientes de resíduos sólidos urbanos. Acta Scientiarum, 24(6), 1599-1602. ]
|
------------ |
|
|
------------ |
------------ |
22.78 ± 1.14[3232 Rosário, F., Pachekoski, W. M., Silveira, A. P. J., Santos, S. F., Júnior, H. S., & Casarin, S. A. (2011). Resíduos de sisal como reforço em compósitos de polipropileno virgem e reciclado. Polímeros: Ciência e Tecnologia , 21(2), 90-97. http://dx.doi.org/10.1590/S0104-14282011005000021. https://doi.org/10.1590/S0104-1428201100...
]
|
26.25 ± 4.5[3232 Rosário, F., Pachekoski, W. M., Silveira, A. P. J., Santos, S. F., Júnior, H. S., & Casarin, S. A. (2011). Resíduos de sisal como reforço em compósitos de polipropileno virgem e reciclado. Polímeros: Ciência e Tecnologia , 21(2), 90-97. http://dx.doi.org/10.1590/S0104-14282011005000021. https://doi.org/10.1590/S0104-1428201100...
]
|
|
|
------------ |
18.2 [3333 Bodzay, B., Fejos, M., Bocz, K., Told, A., Ronkay, F., & Marosi, G. (2012). Upgrading of recycled polypropylene by preparing flame retarded layered composite. Express Polymer Letters Journal, 6(11), 895-902. http://dx.doi.org/10.3144/expresspolymlett.2012.95. http://dx.doi.org/10.3144/expresspolyml...
]
|
16.1[3333 Bodzay, B., Fejos, M., Bocz, K., Told, A., Ronkay, F., & Marosi, G. (2012). Upgrading of recycled polypropylene by preparing flame retarded layered composite. Express Polymer Letters Journal, 6(11), 895-902. http://dx.doi.org/10.3144/expresspolymlett.2012.95. http://dx.doi.org/10.3144/expresspolyml...
]
|
------------- |
|
|
PP Virgin |
71.0 ± 0.71[2727 Caraschi, J. C., & Leão, A. L. (2002). Avaliação das propriedades mecânicas dos plásticos reciclados provenientes de resíduos sólidos urbanos. Acta Scientiarum, 24(6), 1599-1602. ]
|
43.48 ± 0.51[2727 Caraschi, J. C., & Leão, A. L. (2002). Avaliação das propriedades mecânicas dos plásticos reciclados provenientes de resíduos sólidos urbanos. Acta Scientiarum, 24(6), 1599-1602. ]
|
30.72 ± 0.45[2727 Caraschi, J. C., & Leão, A. L. (2002). Avaliação das propriedades mecânicas dos plásticos reciclados provenientes de resíduos sólidos urbanos. Acta Scientiarum, 24(6), 1599-1602. ]
|
------------ |
< 0.03[3434 Becker, D., Balzer, A. K. P., & Soldi, V. (2011). Influência da sequência de mistura do PP-MA nas propriedades dos compósitos de PP e fibra de bananeira. Polímeros: Ciência e Tecnologia, 21(1), 7-12. http://dx.doi.org/10.1590/S0104-14282011005000012. http://dx.doi.org/10.1590/S0104-1428201...
,3535 Vick. (2016). Polipropileno. Retrieved in 2016, January 15, from http://www.vick.com.br/vick/novo/datasheets/datasheet-polipropileno-pp-nit.pdf http://www.vick.com.br/vick/novo/datash...
]
|
0.90-0.91[2929 Milagres, E. G., Vital, B. R., Della, L. R. M., & Pimenta, A. S. (2006). Compósitos de partículas de madeira de Eucalyptus grandis, polipropileno e polietileno de alta e baixa densidades. Revista Árvore, 30(3), 463-470. http://dx.doi.org/10.1590/S0100-67622006000300017. http://dx.doi.org/10.1590/S0100-6762200...
,3535 Vick. (2016). Polipropileno. Retrieved in 2016, January 15, from http://www.vick.com.br/vick/novo/datasheets/datasheet-polipropileno-pp-nit.pdf http://www.vick.com.br/vick/novo/datash...
]
|
------------ |
------------ |
37.36 ± 1.87[3333 Bodzay, B., Fejos, M., Bocz, K., Told, A., Ronkay, F., & Marosi, G. (2012). Upgrading of recycled polypropylene by preparing flame retarded layered composite. Express Polymer Letters Journal, 6(11), 895-902. http://dx.doi.org/10.3144/expresspolymlett.2012.95. http://dx.doi.org/10.3144/expresspolyml...
]
|
25.05 ± 1.6[3333 Bodzay, B., Fejos, M., Bocz, K., Told, A., Ronkay, F., & Marosi, G. (2012). Upgrading of recycled polypropylene by preparing flame retarded layered composite. Express Polymer Letters Journal, 6(11), 895-902. http://dx.doi.org/10.3144/expresspolymlett.2012.95. http://dx.doi.org/10.3144/expresspolyml...
]
|
|
|
|
55.74[3636 Mahendrasinh, M. R., Hemul, V. P., Lata, M. R., & Naynika, K. P. (2013). Studies on mechanical properties of recycled polypropylene blended with virgin polypropylene. International Journal of Zoological Research, 2(3), 194-203. ]
|
34.11[3636 Mahendrasinh, M. R., Hemul, V. P., Lata, M. R., & Naynika, K. P. (2013). Studies on mechanical properties of recycled polypropylene blended with virgin polypropylene. International Journal of Zoological Research, 2(3), 194-203. ]
|
5.68[3636 Mahendrasinh, M. R., Hemul, V. P., Lata, M. R., & Naynika, K. P. (2013). Studies on mechanical properties of recycled polypropylene blended with virgin polypropylene. International Journal of Zoological Research, 2(3), 194-203. ]
|
|
|
------------ |
------------ |
23.4 ± 1.3[3737 Strapasson, R., Amico, S. C., Pereira, M. F. R., & Sydenstricker, T. H. D. (2005). Tensile and impact behavior of polypropylene/low density polyethylene blends. Polymer Testing, 24(4), 468-473. http://dx.doi.org/10.1016/j.polymertesting.2005.01.001. http://dx.doi.org/10.1016/j.polymertest...
]
|
8.5[3737 Strapasson, R., Amico, S. C., Pereira, M. F. R., & Sydenstricker, T. H. D. (2005). Tensile and impact behavior of polypropylene/low density polyethylene blends. Polymer Testing, 24(4), 468-473. http://dx.doi.org/10.1016/j.polymertesting.2005.01.001. http://dx.doi.org/10.1016/j.polymertest...
]
|
|
|