SciELO - Scientific Electronic Library Online

 
vol.29 issue1Non-isothermal melt crystallization kinetics of poly(3-hydroxybutyrate), poly(butylene adipate-co-terephthalate) and its mixturePredicting LDPE/HDPE blend composition by CARS-PLS regression and confocal Raman spectroscopy author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

Share


Polímeros

Print version ISSN 0104-1428On-line version ISSN 1678-5169

Abstract

FERREIRA, Felipe Luiz Queiroz et al. Evaluation of the dispersion of carbon nanotubes in an elastomeric polyurethane and fatigue test. Polímeros [online]. 2019, vol.29, n.1, e2019012.  Epub Mar 18, 2019. ISSN 0104-1428.  http://dx.doi.org/10.1590/0104-1428.02718.

Two series of polyurethane (PU) and carbon nanotubes (CNT) based composites with 0.0, 0.25, 0.5 and 1.0 mass% of CNT were obtained from diluting a commercial masterbatch with 30 mass% CNT and using two different dispersion methods. The quality of the dispersions was assessed using optical microscopy, and scanning and transmission electron microscopies. These tests showed that high controlled shear stress is necessary to produce composites with nanoscale dispersion: the elastic modulus improved by an average of 38% in the case of the high-shear dispersed materials in comparison with the neat polymer. A specific fatigue test conducted by dynamic mechanical analysis was first used in this work to compare the neat PU with the CNT/PU nanocomposites. The number of cycles to failure increased from 2700 for the neat polymer to 3200 for the 0.5 mass% CNT based nanocomposite; the elongation at failure increased by 145% in the test conditions.

Keywords : carbon nanotubes; elastomeric polyurethane; mechanical properties; fatigue.

        · text in English     · English ( pdf )