SciELO - Scientific Electronic Library Online

 
vol.29 número3Effect of moringa and bagasse ash filler particles on basalt/epoxy composites índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Polímeros

versão impressa ISSN 0104-1428versão On-line ISSN 1678-5169

Resumo

PINTAO, Carlos Alberto Fonzar; PIEDADE, Lucas Pereira  e  BORALI, Edgar. System to measure torsion modulus of polymers using the deformation energy method. Polímeros [online]. 2019, vol.29, n.3, e2019031.  Epub 01-Ago-2019. ISSN 1678-5169.  https://doi.org/10.1590/0104-1428.01019.

This paper presents an alternative method to measure the torsion modulus, G, for samples of polymers. We constructed a measurement system with a force sensor (FS) and a rotational movement sensor (RMS) to obtain a relationship between force (F) and torsion angle (θ). An expression that could return the value of G was deduced using the deformation energy method. This technique is nondestructive and independent of knowing the value of Poisson’s ratio. Samples with different diameters of polytetrafluoroethylene (PTFE) were submitted to quasi-static torsion at the same aspect ratio. The aim was to present and validate the use of the technique for a known polymer. The approximate value of 350 MPa of the torsion modulus G was found for PTFE samples. As the values obtained are within the limits found in the literature, the technique can be used to study samples of polymers and other materials.

Palavras-chave : deformation energy; force sensor; polytetrafluoroethylene (PTFE); rotational movement sensor; torsion modulus.

        · texto em Inglês     · Inglês ( pdf )