SciELO - Scientific Electronic Library Online

 
vol.29 issue3Crosslinking starch/oat hull mixtures for use in composites with PLAExtraction and analysis of the parietal polysaccharides of acorn pericarps from Quercus trees author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

Share


Polímeros

Print version ISSN 0104-1428On-line version ISSN 1678-5169

Abstract

BAPTISTA, Carlos André  and  CANEVAROLO, Sebastião Vicente. Grafting polypropylene over hollow glass microspheres by reactive extrusion. Polímeros [online]. 2019, vol.29, n.3, e2019037.  Epub Oct 10, 2019. ISSN 1678-5169.  https://doi.org/10.1590/0104-1428.06118.

Hollow glass microspheres HGM are light, round, hollow, hydrophilic microspheres used to produce polyolefin composites with reduced density. To maintain mechanical strength, it is necessary to improve the adhesion between the polymer matrix and the microspheres, which is done by a compatibilizer. For polypropylene composites a maleic anhydride grafted polypropylene copolymer PP-g-MAH is employed. The melt mixing is done in a reactive extrusion when the maleic group of the compatibilizer reacts with hydroxyl groups present at the microspheres’ surface, grafting a long PP chain. The aim of this work is to quantify the esterification grafting conversion and its efficiency during the reactive extrusion to the formation of PP/HGM composites compatibilized with PP-g-MAH. Techniques like TGA, FTIR and SEM were used to quantify the grafted PP content formed and the efficiency of the esterification reaction, which is mainly dependent of the compatibilizer concentration and reactive extrusion temperature.

Keywords : hollow glass microspheres; maleic anhydride; grafted polypropylene; reactive extrusion.

        · text in English     · English ( pdf )