Figure 1
Cost effects on the periodicity of preventive maintenance (Corrêa & Dias, 2014Corrêa, R. F., & Dias, A. (2014). Desenvolvimento de uma metodologia para manutenção preventiva (Dissertação de mestrado). Programa de Pós-graduação em Engenharia Mecânica, Universidade Federal de Santa Catarina, Florianópolis.).
Figure 2
Definition of periodicity in function of useful life (Corrêa & Dias, 2014Corrêa, R. F., & Dias, A. (2014). Desenvolvimento de uma metodologia para manutenção preventiva (Dissertação de mestrado). Programa de Pós-graduação em Engenharia Mecânica, Universidade Federal de Santa Catarina, Florianópolis.).
Figure 3
Distribution of the function of “useful life” for the equipment systems (Corrêa & Dias, 2014Corrêa, R. F., & Dias, A. (2014). Desenvolvimento de uma metodologia para manutenção preventiva (Dissertação de mestrado). Programa de Pós-graduação em Engenharia Mecânica, Universidade Federal de Santa Catarina, Florianópolis.).
Figure 4
Distribution of function of “useful life” of systems, distributed in time (Corrêa & Dias, 2014Corrêa, R. F., & Dias, A. (2014). Desenvolvimento de uma metodologia para manutenção preventiva (Dissertação de mestrado). Programa de Pós-graduação em Engenharia Mecânica, Universidade Federal de Santa Catarina, Florianópolis.).
Figure 5
Representation of residual cost for a system (Corrêa & Dias, 2014Corrêa, R. F., & Dias, A. (2014). Desenvolvimento de uma metodologia para manutenção preventiva (Dissertação de mestrado). Programa de Pós-graduação em Engenharia Mecânica, Universidade Federal de Santa Catarina, Florianópolis.).
Figure 6
Representation of residual cost of the six systems of a press (Corrêa & Dias, 2014Corrêa, R. F., & Dias, A. (2014). Desenvolvimento de uma metodologia para manutenção preventiva (Dissertação de mestrado). Programa de Pós-graduação em Engenharia Mecânica, Universidade Federal de Santa Catarina, Florianópolis.).
Figure 7
Cost of maintenance with CHC greater than zero and residual cost (Corrêa & Dias, 2014Corrêa, R. F., & Dias, A. (2014). Desenvolvimento de uma metodologia para manutenção preventiva (Dissertação de mestrado). Programa de Pós-graduação em Engenharia Mecânica, Universidade Federal de Santa Catarina, Florianópolis.).
Figure 8
Cost of maintenance with CHC greater than zero without residual cost (Corrêa & Dias, 2014Corrêa, R. F., & Dias, A. (2014). Desenvolvimento de uma metodologia para manutenção preventiva (Dissertação de mestrado). Programa de Pós-graduação em Engenharia Mecânica, Universidade Federal de Santa Catarina, Florianópolis.).
Figure 9
Residual cost of two systems for the number of terms in the Fourier systems, n=5.
Figure 10
Model of a system for simulation of modeling in MATLAB.
Figure 11
POPMP, modeling in MATLAB.
Figure 12
POPMP, residual cost in function of useful life.
Figure 13
POPMP, cost of preventive repair x time.
Figure 14
POPMP, evaluation of the periodicity.
Figure 15
POPMP, interaction of the periodicities.
Figure 16
POPMP, total residual cost in function of the periodicity.
Figure 17
POPMP, cost of preventive repair in function of the periodicity.
Figure 18
POPMP, maintenance cost of useful life evaluated in function of the periodicity.
Figure 19
POPMP, the output of the results.
Figure 20
POPMP, CHC influence in the periodicity.
Table 1
Representation of a hydraulic press divided in systems (Corrêa & Dias, 2014Corrêa, R. F., & Dias, A. (2014). Desenvolvimento de uma metodologia para manutenção preventiva (Dissertação de mestrado). Programa de Pós-graduação em Engenharia Mecânica, Universidade Federal de Santa Catarina, Florianópolis.).