SciELO - Scientific Electronic Library Online

 
vol.28 número4Mesoporous molecular sieve MCM-41 synthesis from fluoride mediaDesalination of aqueous solutions by LTA and MFI zeolite membranes using pervaporation method índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Brazilian Journal of Chemical Engineering

versão impressa ISSN 0104-6632

Resumo

KUMAR, Sachin  e  SINGH, R. K.. Recovery of hydrocarbon liquid from waste high density polyethylene by thermal pyrolysis. Braz. J. Chem. Eng. [online]. 2011, vol.28, n.4, pp. 659-667. ISSN 0104-6632.  http://dx.doi.org/10.1590/S0104-66322011000400011.

Thermal degradation of waste plastics in an inert atmosphere has been regarded as a productive method, because this process can convert waste plastics into hydrocarbons that can be used either as fuels or as a source of chemicals. In this work, waste high-density polyethylene (HDPE) plastic was chosen as the material for pyrolysis. A simple pyrolysis reactor system has been used to pyrolyse waste HDPE with the objective of optimizing the liquid product yield at a temperature range of 400ºC to 550ºC. Results of pyrolysis experiments showed that, at a temperature of 450ºC and below, the major product of the pyrolysis was oily liquid which became a viscous liquid or waxy solid at temperatures above 475ºC. The yield of the liquid fraction obtained increased with the residence time for waste HDPE. The liquid fractions obtained were analyzed for composition using FTIR and GC-MS. The physical properties of the pyrolytic oil show the presence of a mixture of different fuel fractions such as gasoline, kerosene and diesel in the oil.

Palavras-chave : Pyrolysis; Waste HDPE; FTIR; GC-MS; Alternative fuel.

        · texto em Inglês     · pdf em Inglês