SciELO - Scientific Electronic Library Online

vol.16 issue3Mathematical modeling of GMA welding: free fligth transferMulti-objective optimization in cladding of ABNT 1020 carbon steel plate using an austenitic stainless steel cored wire author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand




Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google


Soldagem & Inspeção

Print version ISSN 0104-9224


NUNES, Everton Barbosa et al. Effect of the welding heat input on the microstructure and mechanical properties of the heat affected zone of multipass welded joints of duplex stainless steel. Soldag. insp. (Impr.) [online]. 2011, vol.16, n.3, pp.223-231. ISSN 0104-9224.

The aim this work is to evaluate the influence of multipass welding heat input on the microstructure and mechanical properties of the heat affected zone (HAZ) of UNS S31803 duplex stainless steel multipass welded joints. The shielded metal arc welding process using as filler metal the AWS E2209-17 covered electrode were employed had been carried through V joint groove UNS S31803 DSS, so that two levels of energy (15 and 20 kJ/cm) had been used in this experiment. The condition welded with higher energy higher a HAZ extensive and coarser microstructure in the finishing passes. On the other hand, in the wadding passes and root pass, the HAZ this region was more refined and less extensive. In respect of microhardness, the condition welded with energy of 15 kJ/cm got lower levels. In relation to toughness, it was not observed significant differences.

Keywords : Duplex; Microstructure; Microhardness; Toughness.

        · abstract in Portuguese     · text in Portuguese     · Portuguese ( pdf epdf )


Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License