SciELO - Scientific Electronic Library Online

 
vol.18 número3Caracterização de soldas de aço inoxidável duplex obtidas por soldagem híbrida MIG-plasmaFabrication of Au-Si alloys for using in soldering of gold alloys índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Soldagem & Inspeção

versão impressa ISSN 0104-9224

Resumo

ARAUJO, Bruno Allison et al. Residual stress study of API 5L X80 steel welded joints. Soldag. insp. [online]. 2013, vol.18, n.3, pp.217-226. ISSN 0104-9224.  http://dx.doi.org/10.1590/S0104-92242013000300004.

This study aimed to determine the levels of residual stresses due to welding processes in welded joints of API 5L X80 steel. Initially were executed the welded joint using the Shielded Metal Arc Welding (SMAW) and Gas Tungsten Arc Welding (GTAW) processes, with different consumables and employing an interpass temperature of 175ºC. Three different welded joints were obtained. The residual stress measurements were carried out by x-ray diffraction using a portable diffractometer and software for analyzing the results. In the upper region, it was observed that to higher heat inputs the residual stresses levels were more compressive and more displaced were the tensile stresses peaks. In the lower region of the welded joints, it was found that for higher heat input, were higher levels of tensile residual stresses in the region of the Weld Metal (WM) and the lower the level of tensile residual stresses in the Heat Affected Zone (HAZ).

Palavras-chave : API 5L X80 steel; Welded joints; Residual stresses; X-ray diffraction.

        · resumo em Português     · texto em Português     · Português ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons