SciELO - Scientific Electronic Library Online

 
vol.23 número1Finite Element Simulation of Welding Distortion in Dissimilar Joint by Inherent Deformation MethodAvaliação da Eficácia da Limpeza e Lubrificação do Arame sobre a Alimentabilidade em MIG/MAG índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Soldagem & Inspeção

versão impressa ISSN 0104-9224versão On-line ISSN 1980-6973

Resumo

CUNHA, Tiago Vieira da  e  RIBEIRO, Hélio Ormeu. Evaluation of Oscillation Movement in Submerged Arc Welding. Soldag. insp. [online]. 2018, vol.23, n.1, pp.73-82. ISSN 0104-9224.  http://dx.doi.org/10.1590/0104-9224/si2301.08.

Abstract

Although very common in many welding processes, there is no reference in the industrial applications, nor in the specialized literature, to the use of transverse oscillation movement of the electrode in submerged arc welding. In view of this, in this work an investigation was made regarding the use of the weaving technique in the SAW process. Therefore, welding tests with amplitudes of weaving (triangular) between 0 and 30 mm were carried out for three different levels of welding energy and the penetration, width, reinforcement, reinforcement area and melt area of the weld beads obtained were evaluated, besides the stability of the process. As a result, it was found that, in addition to being perfectly feasible, the application of cited technique in the SAW resulted in higher process melt efficiency, without, however, process instabilities or problems related to the inclusion of slag.

Palavras-chave : Transverse oscillation; SAW; Fusion efficiency; Weld bead morphology.

        · resumo em Português     · texto em Português     · Português ( pdf )