SciELO - Scientific Electronic Library Online

 
vol.69 número1Concentration of manganese tailings via reverse flotation in an acid médiumCost modelling of the product mix from mining operations using the activity-based costing approach índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Rem: Revista Escola de Minas

versão impressa ISSN 0370-4467versão On-line ISSN 1807-0353

Resumo

GOMES, Wellington Lacerda; DELBONI JUNIOR, Homero; CHIEREGATI, Ana Carolina  e  JATOBA, Thiago Luis Alves. Development of ball mill test for simulation of industrial circuit. Rem: Rev. Esc. Minas [online]. 2016, vol.69, n.1, pp.91-96. ISSN 0370-4467.  http://dx.doi.org/10.1590/0370-44672015690001.

The Bond method for ball mil designing has been used for 60 years. Based on the Work Index test, such method is applied mostly in traditional circuit configuration, which includes multi-staged crushing, followed by rod and ball milling. On the other hand, simulation is a widespread and used technique for comminution, classification modeling, and simulation. Even though both methods are complementary, there is no effective integration between them. This work shows a technique designed to integrate both energy and modeling approaches for estimating and improving ball mill grinding performance. The work is based on industrial data survey results, as well as on laboratory testing, the latter developed specifically for such a purpose. The technique was validated under an industrial environment for assessing the obtained results.

Palavras-chave : grinding; modeling; simulation.

        · texto em Inglês     · Inglês ( pdf )