Mechanical tests have been performed in plaster bandages used in orthosis supplied by three different manufacturers. For this, bodies of evidence (BOEs) were made with plates and cylinders shapes. BOEs were submitted to two kinds of mechanical assays: for the plate group, a flexion assay was performed at three points, and, for the cylinder group, a compression assay was performed. Mechanical assays were performed on the Universal Assay Machine EMIC®. Three mechanical properties were assessed after assays: maximum limit load, proportional limit load and stiffness. Results show that a manufacturer was superior over the others for the properties assessed.
Calcium Sulfate; Physical properties; Orthotic devices