SciELO - Scientific Electronic Library Online

 
vol.8 issue2Influence of surface topography on the surface durability of steam oxidised sintered ironEffect of molybdate on phosphating of Nd-Fe-B magnets for corrosion protection author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

Share


Materials Research

Print version ISSN 1516-1439On-line version ISSN 1980-5373

Abstract

SOARES, Edson Pereira et al. A study of Pr-Fe-B magnets produced by a low-cost powder method and the hydrogen decrepitation process. Mat. Res. [online]. 2005, vol.8, n.2, pp.143-145. ISSN 1516-1439.  http://dx.doi.org/10.1590/S1516-14392005000200008.

Sintered Pr-based magnets were produced using a new laboratory technique for powder handling. Unlike the conventional procedure for preparing sintered permanent magnets in the laboratory, the powder technique used in this investigation does not require a glove box. The effects of processing parameters on the magnetic properties of Pr-based sintered magnets prepared using the hydrogen decrepitation process have been studied. Specifically, the effects of sintering temperature and milling time for processing Pr16Fe76B8 magnets have been investigated. Pr16Fe76B8 magnets with the best magnetic properties were sintered between 1015 °C to 1075 °C.

Keywords : Pr-alloys; magnetic materials; hydrides; magnetic properties.

        · text in English     · English ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License