SciELO - Scientific Electronic Library Online

vol.9 issue3Evaluation of rare earth oxides doping SnO2.(Co1/4,Mn3/4)O-based varistor system author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand




Related links


Materials Research

Print version ISSN 1516-1439On-line version ISSN 1980-5373


AGUILAR, Maria Teresa Paulino; CORREA, Elaine Carballo Siqueira; MONTEIRO, Waldemar Alfredo  and  CETLIN, Paulo Roberto. The effect of cyclic torsion on the dislocation structure of drawn mild steel. Mat. Res. [online]. 2006, vol.9, n.3, pp.345-348. ISSN 1516-1439.

Cold forming is usually associated with the "work hardening" of the material being formed. The work hardening behavior of metals subject to complex processing paths is different from that in monotonic deformation. The results show that, after some initial hardening, there is a possibility that further deformation will cause softening in the material ("work softening"). Recent work showed that cyclic torsion applied to drawn products causes changes in the subsequent tensile behavior of low carbon steel, and that the effect will depend on the previous "history" of the material. For annealed samples, the cyclic torsion leads to an increase in the yield strength, but does not affect the tensile strength and elongation. For the case of previously drawn bars, the cyclic deformation caused a decrease in the yield and tensile strength and an increase in the total elongation. The present paper discusses the dislocation structure changes associated with different strain paths in mild steel.

Keywords : dislocation structures; cyclic torsion; drawing.

        · text in English     · English ( pdf epdf )


Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License