SciELO - Scientific Electronic Library Online

 
vol.15 número3Impact properties of aluminium - glass fiber reinforced plastics sandwich panelsStudy of an anisotropic polymeric cellular material under compression loading índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Materials Research

versión impresa ISSN 1516-1439

Resumen

SILVA, Luciano Monteiro da; CLARO, Ana Paula Rosifini Alves; BUZALAF, Marília Afonso Rabelo  y  GRANDINI, Carlos Roberto. Influence of the substitutional solute on the mechanical properties of Ti-Nb binary alloys for biomedical use. Mat. Res. [online]. 2012, vol.15, n.3, pp. 355-358.  Epub 05-Abr-2012. ISSN 1516-1439.  http://dx.doi.org/10.1590/S1516-14392012005000040.

Titanium alloys are widely used in the manufacture of biomedical implants because they possess an excellent combination of physical properties and outstanding biocompatibility. Today, the most widely used alloy is Ti-6Al-4V, but some studies have reported adverse effects with the long-term presence of Al and V in the body, without mentioning that the elasticity modulus value of this alloy is far superior to the bone. Thus, there is a need to develop new Ti-based alloys without Al and V that have a lower modulus, greater biocompatibility, and similar mechanical strength. In this paper, we investigated the effect of Nb as a substitutional solute on the mechanical properties of Ti-Nb alloys, prepared in an arc-melting furnace and characterized by density, X-ray diffraction, optical microscopy, hardness and elasticity modulus measurements. The X-ray and microscopy measurements show a predominance of the α phase. The microhardness values showed a tendency to increase with the concentration of niobium in the alloy. Regarding the elasticity modulus, it was observed a nonlinear behavior with respect to the concentration of niobium. This behavior is associated with the presence of the α phase.

Palabras llave : Ti-based alloys; elasticity modulus; biomaterials.

        · texto en Inglés     · pdf en Inglés