Allcem FGM (100311) Multi-steps |
Condac 37: 37% phosphoric acid. (240211) |
(1) Acid etching (15 s); (2) Rinsing (15 s); (3) Air drying leaving dentin visible moist (5 s); (4) Vigorous application of one coat of adhesive (10 s) ; (5) Application of another coat of the adhesive (10 s) with gentle agitation; (6) Air drying (10 s) at distance; (7) Light polymerization (10 s). |
Treated with a prehydrolyzed silane solution - Prosil (60s) |
1. Equal Parts of pastes A and B and mix paste for 20 seconds. 2. Apply the mixture on the tooth surface and on the resin composite crown. 3. Apply pressure for 5 min and light activation (20s) on each surface. |
Adhesive System Ambar: UDMA, HEMA, methacrylate acidic monomers, methacrylate hydrophilic monomers, silanized silicon dioxide, camphorquinone, 4-EDAMB, ethanol. (150612) |
AllCem Resin Cement Base: Methacrylic monomers (TEGDMA, Bis EMA and BisGMA), camphorquinone, co-initiators, barium aluminum silicate glass particles, nanoparticles of silicon dioxide, inorganic pigments and conservants. Catalyst: Methacrylic monomers, dibenzoil peroxide and stabilizers, aluminum silicate glass particles. (100311) |
Multilink System Pack Ivoclar Vivadent (P82686) Multi-steps |
Multilink Primer Primer A: water, initiators (Lot A: P75512) Primer B: Phosphonic acid acrylate, hydroxyethyl methacrylate, methacrylate modified polyacrylic acid, stabilizers (Lot B:P75451) |
(1) Mix one drop of each Multilink Primer A and B for 10 seconds; (2) Vigorous application for 20 seconds. (3) Light jet of air used for 10 seconds. |
Treated with a prehydrolyzed silane solution - Prosil (60s) |
1. Equal Parts of pastes A and B and mix paste for 20 seconds. 2. Apply the mixture on the tooth surface and on the resin composite crown. 3. Apply pressure for 5 min. |
Multilink Resin Cement: Base and Catalyst: BIS-EMA, UDMA, BIS-GMA, HEMA, barium glass filler, silicon dioxide filler, ytterbium trifluoride, catalysts, stabilizers, pigments (N79065) |
Panavia F Kuraray (051222) Multi-steps |
ED Primer: Primer A: HEMA, 10-MDP, 5-NMSA, water, accelerator (Lot A: 00309A) Primer B: 5-NMSA, accelerator, water, sodium benzene sulphinate (Lot B: 00183A) |
(1) Mix one drop of each Ed Primer A and B for 5 seconds; (2) Vigorous application for 20 seconds. (3) Light jet of air used for 10 seconds. |
Treated with a prehydrolyzed silane solution - Prosil (60s) |
1. Equal Parts of the catalyzer and universal and mix for 20 seconds. 2. Apply the mixture on the tooth surface and on the resin composite crown. 3. Apply pressure for 5 min and light activation (20s) on each surface after removing excess. |
Paste A: 10-MDP, silanated silica, hydrophobic aromatic and aliphatic dimethacrylate, hydrophilic dimethacrylate photoinitiator, dibenzoyl peroxide (Lot: 00254C ) Paste B: silanated barium glass, sodium fluoride, sodium aromatic sulfinate, dimethacrylate monomer, BPO (Lot: 0031C) |
RelyX U-100 3M/ESPE (426343) Self-adhesive |
Base: glass fiber, methacrylate phosphoric acid esters, dimethacrylates, silanated silica, sodium persulfate Catalyst: glass fiber, dimethacrylates, silanated silica, p-toluene sodium sulfate, calcium hydroxide |
Without Pre-treatment |
Treated with a prehydrolyzed silane solution - Prosil (60s) |
1. Mix cement (20 seconds) 2. Apply the mixture on the tooth surface and on the resin composite crown. 3. Apply pressure for 5 min and light activation (20s) on each surface. |
SeT PP SDI (S1101113) Self-adhesive |
Methacrylated phosphoric esters, UDMA, photoinitiator, fluoroaluminosilicate glass, pyrogenic silica. |
Without Pre-treatment |
Treated with a prehydrolyzed silane solution - Prosil (60s) |
1. Mix cement (20 seconds) 2. Apply the mixture on the tooth surface and on the resin composite crown. 3. Apply pressure for 5 min and light activation (20s) on each surface. |