SciELO - Scientific Electronic Library Online

 
vol.20 número4The distribution of Lignin and Xylan in the Inner and Surface Layers of the Fiber from Eucalyptus Kraft Pulp and its Effects on Oxygen DelignificationEvolution of TiO2 Nanotubular Morphology Obtained in Ethylene Glycol/Glycerol Mixture and its Photoelectrochemical Performance índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Materials Research

versão impressa ISSN 1516-1439versão On-line ISSN 1980-5373

Resumo

HERNANDEZ, Dany Arnoldo; SOUFEN, Carlos Alberto  e  ORLANDI, Marcelo Ornaghi. Carbon Fiber Reinforced Polymer and Epoxy Adhesive Tensile Test Failure Analysis Using Scanning Electron Microscopy. Mat. Res. [online]. 2017, vol.20, n.4, pp.951-961.  Epub 06-Jul-2017. ISSN 1980-5373.  https://doi.org/10.1590/1980-5373-mr-2017-0229.

Morphological characteristics analysis before and after tensile tests were studied using scanning electron microscopy (SEM) technique to follow the failure evolution on carbon fiber reinforced polymer (CFRP) and epoxy resins. Micrograph analysis of CFRP plate before tensile test shows some intrinsic manufacturing defects, which can influence the mechanical properties of the material. Micrograph analysis after tensile test shows that cracks propagation start in manufacturing defects, which lead the carbon fiber to be pulled out instead of breaking. Thus, cracks propagate through interfacial zones affecting the sharing force between matrix and carbon fiber. For the epoxies materials, the microscopy analysis showed that although epoxies adhesive have different phase distribution before tensile test, failure surfaces are described by fine granular particles covalent bonded with matrix, and the material fails in a brittle manner when the strength outstripped these bonds. Failure process for each material correlating the mechanical properties with the morphological characteristics of materials was discussed.

Palavras-chave : Carbon fiber reinforced polymer; electron microscopy; tensile test.

        · texto em Inglês     · Inglês ( pdf )