SciELO - Scientific Electronic Library Online

vol.22 número1Importance of the Order of Addition of the Alumina Precursor and its Type Into Al-SBA-15 Mesoporous Materials for Use as Water AdsorbentsObservations of Corrosion Product Formation and Stress Corrosion Cracking on Brass Samples Exposed to Ammonia Environments índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados




Links relacionados


Materials Research

versão impressa ISSN 1516-1439versão On-line ISSN 1980-5373


GONCALVES, Bruno José Arcanjo; CREN, Érika Cristina; WINDMOLLER, Dario  e  FIGUEIREDO, Kátia Cecília de Souza. Activated Carbon-Loaded Polydimethylsiloxane Membranes for the Pervaporation of 1-Butanol from Aqueous Solutions. Mat. Res. [online]. 2019, vol.22, n.1, e20180573.  Epub 13-Dez-2018. ISSN 1980-5373.

Butanol has shown potential as an alternative biofuel. It can be obtained through ABE fermentation, which produces 1-butanol, ethanol and acetone. Pervaporation is a potential separation process, since it can be successfully applied to remove trace components such as butanol, which is toxic to the cells. The development of an effective membrane is the limiting factor for this technology. Activated carbon-containing polydimethylsiloxane membranes were prepared by varying the filler content up to 2 wt%. The resulting membranes were characterized for the separation of model solutions with 1-butanol, acetone, ethanol and water by pervaporation. The effects of activated carbon load (0, 1, 2 wt%) and temperature (25, 40, 55ºC) on flux and separation factor were evaluated. The addition of 1 wt% activated carbon increased membrane free volume, changed surface morphology and showed flux of 45 g/m2h, with separation factor for 1-butanol of 370, at 55ºC.

Palavras-chave : Activated carbon; Butanol; Membrane; Pervaporation; Polydimethylsiloxane.

        · texto em Inglês     · Inglês ( pdf )