Diamond-like carbon (DLC) films are amorphous metastable carbon form that provide interesting mechanical and tribological properties. The role of film thickness influence upon wear and mechanical properties is of interest and not yet fully reported. In this study, two samples of previously plasma nitrocarburized, quenched and tempered H13 steel were duplex treated. First, a physical vapor deposition (PVD) chromium nitride (CrN) layer was applied, followed by a top final diamond-like carbon layer applied by plasma-enhanced chemical vapor deposition (PECVD). To evaluate thicknesses influence on mechanical and wear properties of coatings, samples were treated using two different thicknesses of both layers. In this study, the thickest CrN and DLC case presented higher hardness and better tribological properties, however, its failure occurs in brittle fashion.
Keywords:
Duplex coatings; DLC coating; CrN coating; wear; PECVD
