ABSTRACT
The Amazon has a great potential of natural resources. There is a wide diversity of plant specimens and many of them can be extracted and processed such as jute, sisal and mauve fibers. It is known that usualy small communities from Amazon build their boats using a rudimentary and ecologically incorrect method, which comes from brazilian natives. This method consists in cut of trees with large trunks, which are burned and scraped until they get the desired shape. This process is not viable due to the long time spent and also it is environmentally unacceptable nowadays. Considering these facts, it was created a project at UFPA aiming to evaluate the building viability of small boats adapted to the Amazon region. These boats have been made with composite material, polymeric resin reinforced with natural fiber fabric. Hence, this paper brings the first stage of this project, treating on the build of a small boat with reduced dimensions. This prototype was experimentally studied, using strain gages, and evaluated numerically by finite element method through the software ANSYS¨. This stage was very important to optimize the parameters used in the finite element model, which was employed to analyse the model with real dimensions. As a result, the numerical models showed a good compatibility with real tests. Additionally, the designed boat demonstrated to be able to hold the imposed loads.
Green composites; Numerical and Experimental Analysis; Small boats
