SciELO - Scientific Electronic Library Online

vol.28 número3Unsteady MHD flow of a dusty non-Newtonian Bingham fluid through a circular pipeInfluence of loading, contamination and additive on the wear of a metallic pair under rotating and reciprocating lubricated sliding índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados




Links relacionados


Journal of the Brazilian Society of Mechanical Sciences and Engineering

versão impressa ISSN 1678-5878versão On-line ISSN 1806-3691


MELO, Anderson C. A. de; MILAN, Júlio César G.; SILVA, Márcio B. da  e  MACHADO, Álisson R.. Some observations on wear and damages in cemented carbide tools. J. Braz. Soc. Mech. Sci. & Eng. [online]. 2006, vol.28, n.3, pp.269-277. ISSN 1678-5878.

Cutting tools are subjected to extremely unfavorable conditions during machining operations. High cutting temperatures, compressive and shearing stresses, chemical attacks, variable cyclic thermal and mechanical loads are some adverse conditions that wear and damage these tools. Therefore, it is crucial to understand the process of tool wear and damage and how the cutting parameters affect it in order to underpin decisions regarding the most favorable conditions to address the problem. This article treats on some forms and mechanism of wear and damage that cemented carbides can undergo during machining. Special attention was given to damages caused during interrupted cutting (e.g., milling), such as fracture, chipping and thermal fatigue. Experimental details and results of the latter phenomenon, which was studied under different cutting conditions, are discussed and confronted with literature.

Palavras-chave : Cemented carbide tools; milling; tool damage; thermal fatigue.

        · texto em Inglês     · Inglês ( pdf )


Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons