SciELO - Scientific Electronic Library Online

 
vol.28 número3Some observations on wear and damages in cemented carbide toolsSensitivity analysis of shallow water problems via perturbative methods índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

Compartilhar


Journal of the Brazilian Society of Mechanical Sciences and Engineering

versão impressa ISSN 1678-5878versão On-line ISSN 1806-3691

Resumo

MARU, Marcia M.  e  TANAKA, Deniol K.. Influence of loading, contamination and additive on the wear of a metallic pair under rotating and reciprocating lubricated sliding. J. Braz. Soc. Mech. Sci. & Eng. [online]. 2006, vol.28, n.3, pp.278-285. ISSN 1678-5878.  http://dx.doi.org/10.1590/S1678-58782006000300005.

This paper deals with an experimental study of wear and friction responses from lubricated sliding. Tests were carried out using a tribometer having devices for both continuous and reciprocating motion. The tested specimens were pins of AISI 52100 steel and counter-faces of AISI 8640 steel. The lubricant was paraffin mineral oil, VI 100. The presence of additives and contamination in the lubricant was investigated under two mechanical loading levels, determined by the velocity/load relation. Wear was evaluated in terms of morphology of the worn surfaces and by dimensional analysis of worn area of the pins. It was possible to obtain a ranking of influences on wear of mechanical loading, mechanical motion, oil additive and contamination presence in oil.

Palavras-chave : Wear; paraffin oil; abrasive contaminant; rotating motion; reciprocating motion; mechanical loading; mixed lubrication.

        · texto em Inglês     · Inglês ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons