Predictive models are required to provide the bending set point for bending for the flatness control devices at rolling stands of finishing mill of Hot Strip Mill (HSM). A simple model for roll stack deflection at the finishing mill has been illustrated where a modified Misaka’s equation has been used to obtain mean flow-stress. Investigation has been performed to understand the effect of width of roll on roll stack deflection. The bending on the deflection has been found to have a positive effect to reduce the amount of the stack deflection. The results from the sensitivity analysis of the roll width on roll deflection are also described.
hot strip mill (HSM); finishing stands; mean flow stress (MFS); continuously variable crown (CVC); shear stress; bending